CP6的IO代码 - 第131页

Part 3 Chapter 3 Replacing Consumable Parts Edition 1.1 3-3-2 CP-6-series Mechanical Reference 3.2 Nozzle Reflective Disk Replacement Point Replace the nozzle fluorescent seal if the seal becomes dirty and causes vision …

Part 3 Chapter 3 Replacing Consumable Parts

Edition 1.1 3-3-1 CP-6-series Mechanical Reference

3. Replacing Consumable Parts

3.1 Nozzle Replacement

Point

Replace nozzles that become bent, deformed, or blocked. When removing the damaged

nozzle, be careful not to lose the spring loaded under it.

Procedure

Warning

Always be sure to cut out the 200 V power before carrying out any

work.

Nozzle

Spring

Push and turn

Remove slowly

CP6M3055

Part 3 Chapter 3 Replacing Consumable Parts

Edition 1.1 3-3-2 CP-6-series Mechanical Reference

3.2 Nozzle Reflective Disk Replacement

Point

Replace the nozzle fluorescent seal if the seal becomes dirty and causes vision processing

errors to occur.

Procedure

1. Always wash your hands before handling the seals.

2. Choose the correct disk, referring to table below if necessary.

3. Check that the fluorescent disk is free of deformity and is clean.

4. Peel the fluorescent disk from its paper backing and remove the small circular

cutout at the center of the seal by pushing it out from the side of the seal covered

with fluorescent paint. If the cutout is pushed out from the side covered with

adhesive, some of the fluorescent paint may be torn away when the circular cutout

comes loose from the rest of the disk.

5. Match the center of the disk with the center of the nozzle. Using jig (for reflective

plate), push the disk into the nozzle as shown in figure below. Check that no

space exists between the seal and the nozzle.

6. Use an exacto knife to cut away any excess fluorescent seal.

7. Clean the fluorescent seal with a soft brush.

Reflective disk

Jig

Reflective

disk size

Jig No.

ø12 ~ 20

❒22, ■22

❒29, ■29

(Plane type)

WPJ0770

AWPJ9101

YPJ0700

CP6M3056

Part 3 Chapter 3 Replacing Consumable Parts

Edition 1.1 3-3-3 CP-6-series Mechanical Reference

Part Numbers for the Nozzles and Reflective Disks

φ0.7

φ1.0

φ1.3

φ1.8

φ2.5

φ3.75

φ2.5

φ3.75

φ5.0

φ7.0

φ10.0

AWPH9512

AWPH9522

AWPH9532

AWPH9552

AWPH9562

AWPH9572

AWPH9582

AWPH9602

AWPH9612

AWPH9662

AWPH9682

AYPH9512 *

AYPH9534 *

φ12

φ20

φ16

φ20

❒20

❒22

❒29

LPH5012

LPH5022

LPH5032

LPH5042

WPH8201

WPH8211

WPH8081

WPH8121

WPH8101

WPH8231

WPH8181

YPH8061

YPH8570

φ5.0 AWPH9672 ■22 WPH8221

φ7.0

AWPH9694

AYPH9524 *

■22

■29

WPH8081

YPH8580

CP6M3057Ea

Nozzle

size

Nozzle Assy No.

Reflective

disk size

Reflective

disk No.

For backlightFor frontlight

* Applies to the 5000-series nozzles.