CP6的IO代码 - 第159页

Part 5 Adjustments

Part 4 Chapter 6 Connecting the Communication Cable

Edition 1.0 4-6-2 CP-6 Series Mechanical Reference

Notes:

Part 5

Adjustments

1. Placing Heads

The placing head picks parts from the feeders and place them onto the board currently in

production. The placing head assembly consists of the holder, nozzle, shaft and other related

parts.

1.1 Nozzle

Nozzle Types

The following nozzles are available. Select nozzles corresponding to the parts which are

to be placed.

SS nozzle : ø0.7 LL nozzle : ø3.7

S nozzle : ø1.0 3L nozzle : ø5.0

M nozzle : ø1.3 3L nozzle : ø7.0

L nozzle : ø1.8 3L nozzle : ø10.0 (Only for 5000 type)

LL nozzle : ø2.5

WARNING

• Always be sure to cut off the 200 V power before carrying out any

work.

• Exercise extreme caution when working on the machine if the cam is

not at its origin (0 deg.). Recoil of the cam axis can endanger the

operator.

Removal

1. Push the nozzle in. While pushing in, turn to the left.

2. Pull the nozzle out slowly by hand. When removing the nozzle, be careful not to

lose the spring that is inside the nozzle.

Installation

When attaching the nozzle, push it in from the bottom and turn to the right.

Push and turn

Remove slowly

Nozzle

Spring

CP6M5001

Part 5 Chapter 1 Placing Head

Edition 1.0 5-1-1 CP-6 Series Mechanical Reference