CP6的IO代码 - 第323页

4. Loading Feeders into the Feeder Rack When loading the feeder into the feeder rack, make sure to observe the following points. 1. Confirm that the tape leaf is locked. Confirming Locked T ape Leaf Note: Lock the tape l…

C-2 Is the sprocket stop position stable?

Measure in the same way as C-1.

C-3 Is the part (parts tape) set as per the nozzle and tape leaf specification?

When the parts tape is set into the feeder, check that it is in accordance with nozzle

and tape leaf specifications.

Refer to section 1.9 “Selecting a Tape Leaf” of Chapter 1 of this part for details.

C-4 Is the tape leaf deformed?

Use a flatness measurement tool to make sure the W8 mm tape feeder tape leaf is

free of warping and twisting.

Flatness measurement tool W8 x P2 : Z9913AWPJ9540

W8 x P4 : Z9913AWPJ9550

For shutter-type tape leaf units, stand the tape leaf vertically and verify that the

shutter drops under its own weight (simple test). Also check that there is no

looseness in the shutter, and no deformation in the U-slot.

Checking the Shutter Type Tape Leaf

CP6M8089

Part 8 Chapter 3 Troubleshooting

Edition 1.0 8-3-6 CP-6 Series Mechanical Reference

4. Loading Feeders into the Feeder Rack

When loading the feeder into the feeder rack, make sure to observe the following points.

1. Confirm that the tape leaf is locked.

Confirming Locked Tape Leaf

Note: Lock the tape leaf using the tape leaf lock or the clamp pin.

2. Carefully set the feeder into the feeder rack and gently slide to the front of the

feeder slot.

Setting Feeder into Feeder Rack

Feeder Rack

CP6M8091

Tape leaf

Tape leaf lock

Clamp pin

CP6M8090

Part 8 Chapter 4 Loading Feeders into Feeder Rack

Edition 1.0 8-4-1 CP-6 Series Mechanical Reference

Note: Do not hit the front bar on the feeder rack with the front of the feeder (especially with the

tape leaf). Doing so may damage the tape leaf.

If the tape leaf is damaged, make sure to replace with a new one.

Carefully Loading Feeder

CP6M8092

Part 8 Chapter 4 Loading Feeders into Feeder Rack

Edition 1.0 8-4-2 CP-6 Series Mechanical Reference