CP6的IO代码 - 第352页
6.2 Pallet Ejection Pusher The pallet ejection pusher ejects pallets on the D-axis carrier to the "down" lifter. Adjusting the Position of the Pneumatic Cylinder W arning Always be sure to cut out the 200 V pow…
Adjusting the Shock Absorber
Warning
Always be sure to cut out the 200 V power before carrying out any
work.
Adjust in the same way as for the setup station advance and retraction shock absorbers.
Set the scale indicator at "5".
5
5
5
5
0.5 - 1.0 mm
Nut
Scale indicator
Scale indicator
CP6M9040
Pallet IN stopper
Shock absorber
CP6M9039
Part 9 Chapter 6 Pallet Pushers
Edition 1.0 9-6-2 CP-6 Series Mechanical Reference
6.2 Pallet Ejection Pusher
The pallet ejection pusher ejects pallets on the D-axis carrier to the "down" lifter.
Adjusting the Position of the Pneumatic Cylinder
Warning
Always be sure to cut out the 200 V power before carrying out any
work.
1. Push a pallet to the "down" lifter.
2. Adjust the position of the cylinder so that there is no play between the side of the
pallet and the tab on the pusher at this time.
Pneumatic cylinder
Pneumatic cylinder
Pallet
Tab
CP6M9042
CP6M9041
Part 9 Chapter 6 Pallet Pushers
Edition 1.0 9-6-3 CP-6 Series Mechanical Reference
Notes:
Part 9 Chapter 6 Pallet Pushers
Edition 1.0 9-6-4 CP-6 Series Mechanical Reference