DECAN_S1_Maintenance_EN.pdf - 第54页

Mon thly Inspe ction chapt er 5 Nex t Generation, Multi- Funct ional Placer DE CAN S 1 Mai nte nan ce H an dbo ok 5-1 Cleaning Head Spindle T ool for M aintenanc e Cleaning liquid, ultra fine fiber cloth, air gun Measure…

Weekly Inspection

chapter 4

Next Generation, Multi-Functional Placer

DECAN S1 Maintenance Handbook

4-6

Checking and Replacing Head Vacuum Filter

Weekly Inspection

Step 5.

Remove by turning in the direction of the arrow Vacuum

Filter.

Step 6.

Release the emergency stop as described in "Releasing

'Emergency Stop' mode" on page 1-6 and perform the

operation again.

Caution

Check the vacuum filter every week and replace it within at least 6

months to ensure the vacuum for part pickup is generated properly.

Caution

It is recommended that the solenoid valve, which is a consumable

product, is replaced every two years to ensure stable operation.

Monthly Inspection

chapter 5

Next Generation, Multi-Functional Placer

DECAN S1 Maintenance Handbook

5-1

Cleaning Head Spindle

Tool for Maintenance

Cleaning liquid, ultra fine fiber cloth, air gun

Measures

Step 1.

Move the X Frame to front by referring to "Forward

movement of the X-frame" on page 1-3

Step 2.

Press the 'STOP' and 'RESET' buttons in order after

pressing the 'EMG' button on the OP panel to stop

operation.

For more details, refer to "How to perform emergency stop" on page

1-2.

Step 3.

Saparate the coil tube from vacuum filter

chapter 5

Monthly Inspection

Step 4.

Remove the nozzle

Cleaning Head Spindle

(Time required: 30min / No. M-1)

Monthly Inspection

chapter 5

Next Generation, Multi-Functional Placer

DECAN S1 Maintenance Handbook

5-2

Cleaning Head Spindle

Monthly Inspection

Step 5.

Put the cloth underneath the spindle

Step 6.

Cleaning the interior of the tube by an air gun.

Caution

Using the air gun without putting on goggles may cause injury to

operator's eyes. Be sure to wear goggles when using the air gun.

Step 7.

Release the emergency stop as described in "Releasing

'Emergency Stop' mode" on page 1-6 and perform the

operation again.