DECAN_S1_Maintenance_EN.pdf - 第70页
Mon thly Inspe ction chapt er 5 Nex t Generation, Multi- Funct ional Placer DE CAN S 1 Mai nte nan ce H an dbo ok 5-1 7 Cleaning and Lubricating X Frame LM Guide, Ball Screw Step 13. Inje ct th e gre ase u sing a lu bric…
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-16
Cleaning and Lubricating X Frame LM Guide, Ball Screw
Monthly Inspection
Step 11.
Fasten the bolts fixing the cover in the order shown in
the following figure using a hex wrench (M3).
4
2
1
3
Step 12.
Fasten the cover tension adjustment bolts using a hex
wrench (M4).
Fasten the tension adjustment bolts so that the block of the grease
scatter prevention cover and the spacer come into close contact.
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-17
Cleaning and Lubricating X Frame LM Guide, Ball Screw
Step 13.
Inject the grease using a lubricator.
(A1 ~ A4: LM Guide, B1: Ball screw)
Caution
If the machine's operating environment is harsh, check its lubrication
status frequently.
Caution
The designated grease must be applied using the designated
lubricator in the designated manner. Other lubricating methods are
unacceptable.
Step 14.
Move the head assembly to the left and right three
times using a head assembly handle.
Step 15.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-18
Cleaning and Lubricating Y Frame LM Guide
Monthly Inspection
Tool for Maintenance
Ultra-fine fiber cloth, Flat Brush, Lubricator, GREASE-GREASE_AFE-CA
Measures
Step 1.
Move the X Frame to rear by referring to "Backward
movement of the X-frame" on page 1-4
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Clean the LM guide rail using an ultra fine fiber cloth.
Step 4.
Inject the grease using a lubricator.
A
B
Cleaning and Lubricating Y Frame LM Guide
(Time required: 60min / No. M-10)