00197195-02-UG SetupCenter 5.1_en - 第159页

Setup Verification in Practical Cases Alternatives Offline Setup Verification User Guide SIPLACE Setup Center 5.1 15 9 8.3 Offline Setup Verification ▪ The "Settings for offline setup verification“ option has been a…

Setup Verification in Practical Cases

Online Setup Verification Alternatives

158 User Guide SIPLACE Setup Center 5.1

The barcode reader confirms each action with a signal and, once the last packaging unit has been

scanned, issues a longer signal as confirmation.

Online setup verification is finished when you have verified all the tables.

If the online setup verification has been already completely prepared in the offline area, the online setup

verification will be completed after step 4 provided that the tables have been assigned to the correct lo-

cation.

8.2.2 Alternatives

In this first step, you can select "Table check" and other actions. Use the soft keys to browse up and

down through the menu and select the required actions. Then press the Enter key.

The alternative actions available are explained in brief below:

Step 6c (optional)

Query for reordering packaging units.

Yes - Information for reordering is saved in the SC data-

base.

No – No information for reordering.

The query only appears if the Enable quantity correction

during refill option has been activated via

Extras Set

tings Common

Steps 6a, 6b and 6c are repeated until all location tracks

have been verified.

Step 7

When the last track in the location has been verified (or

has been skipped with the right reader button) the main

menu appears at the reader.

Recorder

Component?

Yes No

Setup Center

Action Description

Table Check Complete table check, which rechecks even those

tracks which have already been successfully

checked. In other words, it checks all tracks. All

scanned data for this table before will be overwrit-

ten with the newly scanned values.

Missing tracks Table check which checks all tracks that have not

been checked yet.

Shift Change Verification Complete table check, without quantities being

sent to the station. This enables you to perform a

new setup verification during the current produc-

tion run. No packaging unit data are changed in the

Setup Center database.

Setup Verification in Practical Cases

Alternatives Offline Setup Verification

User Guide SIPLACE Setup Center 5.1 159

8.3 Offline Setup Verification

▪ The "Settings for offline setup verification“ option has been activated via

Extras Settings Common

▪ The setup to be verified has been selected as an Offline setup and is displayed in Setup Center. The

selection is made at the left edge of the menu window by choosing the option "Offline setup

verification“. You can select either a job, recipe or setup. To verify a remote scanner or PDA, you

need the quick start barcode on the setup report.

▪ In the same selection window, you can right-click with the mouse to open the context menu for a set-

up, in which the option "Print report“ can be selected to print the Setup report.

Make sure that the "Setup verification" and "Component search" barcodes are in the header bar of

the printout.

NOTICE

Switch on changeover table management

If you want to run offline setup verification, you will need to switch on changeover table man-

agement.

Setup Verification in Practical Cases

Offline Setup Verification Using the Reader

160 User Guide SIPLACE Setup Center 5.1

8.3.1 Using the Reader

Step 1 (optional)

Scan in the the User if the User registration at the reader

required option has been activated via

Extras Settings

Reader

Step 2

► Set the feeders and packaging units on the table, ac-

cording to the setup report.

► Scan in the Setup Verification barcode (quick start

barcode) of the location to be verified. You find the

barcode in the headline of the setup report.

⇨ This loads the setup in the SIPLACE Setup Center

user interface and selects the table and the first com-

ponent which has been set up.

Step 3 (optional)

The query only appears during the offline setup verifica-

tion of an X or SX table. The barcode is located at the

front side of the docking station.

Step 4 (optional)

Scan in the Changeover table barcode.

Setup Center will now exchange setup verification data

between the docking station and the X-feeders. During

this, press the "Retry" soft key every 10 seconds until you

are able to start the setup verification procedure.

Step 5 (optional)

Reading in data from the X-feeders into Setup Center

takes about 20 sec. for a completely set up X or SX table.

In order for the reader to not run into a timeout you need

to press the left Retry key every 5 -10 sec. until step 7a is

displayed.

Only during verification at the docking station.

Setup Center

Scan DS

DID00000004

DID

Scan COT barcode

Press buttom to

continue

Retry