00197195-02-UG SetupCenter 5.1_en - 第71页
Setting System Components Setup Verification System in the Setup Editor Settings in the SI PLACE Pro Programming System User Guide SIPLACE Setup Center 5.1 71 4.3.2 Setup Verification S ystem in the Setup Ed itor In the …
Setting System Components
Settings in the SIPLACE Pro Programming System Barcode Option in the Stations Editor
70 User Guide SIPLACE Setup Center 5.1
MTC - setup (table view)
4.3 Settings in the SIPLACE Pro Programming System
For setup verification and component level indication in SIPLACE Setup Center, the following must be
configured in SIPLACE Pro (for detailed Information about the settings, please see the operating instruc-
tions for SIPLACE Pro additionally).
4.3.1 Barcode Option in the Stations Editor
To operate Setup Center, enable the setting "Component Barcode". Make sure
that the barcode reader is parameterized in the programming system.
► Select the stations in the Station tree view.
► Go to Options and enable "Component Barcode".
Setting System Components
Setup Verification System in the Setup Editor Settings in the SIPLACE Pro Programming System
User Guide SIPLACE Setup Center 5.1 71
4.3.2 Setup Verification System in the Setup Editor
In the target setup, select the installed setup verification system for each station setup.
► Select the setup in the Setup Verification tree view.
► Select a suitable setup verification system in the Station setup.
4.3.3 Standard Packaging Unit Size
This value represents the quantity of components in a new packaging unit. The value can be created
globally as the characteristic of a package shape or a component.
NOTICE
Activating the "Supports Traceability SOKO 407" option
Up to SIPLACE Pro version 8.0 the option for support of Special design 407 Traceability has to
be activated in the station editor. This is no longer necessary from version 9.0
Setup verification system Meaning
None No setup verification system used
External Unforced Setup Verification SIPLACE Setup Center without communication to
the station (= unforced setup verification)
External Forced Setup Verification with CLI SIPLACE Setup Center with Component Level In-
dicator; i.e. with quantity barcode, splice sensor
available as option.
External Forced Setup Verification without CLI SIPLACE Setup Center without component level
indicator; i.e. without quantity barcode, splice sen-
sor available as option.
Internal Unforced Setup Verification SIPLACE handheld scanner
NOTICE
The Setup Verification option is licensed for the following types:
► External (forced setup without component level indicator)
► External (forced setup with component level indicator)
Setting System Components
Settings in the SIPLACE Pro Programming System Standard Feeder Pitch
72 User Guide SIPLACE Setup Center 5.1
If no quantity is read when a barcode label is scanned in, SIPLACE Setup Center takes the quantity of
the standard container size of the component and enters it in the packaging unit data. The exception to
this is when the standard container size is zero.
This method of quantity input should be avoided, as almost all component manufacturers incorporate the
original container size in the barcode labels. For reasons of downward compatibility, however, this value
is still evaluated and actively used.
4.3.4 Standard Feeder Pitch
This value indicates the pitch of the feeder. The value can be recorded globally as the characteristic of
a package shape. In addition, this default value can also be overwritten for a special component of a
setup.
The component level indicator of the station uses this value, for example, to calculate how many com-
ponents there are between a detected splice and the pickup position.
► Select the component or component shape in the Component tree view.
► Enter the Default feeder pitch in the Feeders tab.
NOTICE
Standard packaging unit size for the component shape
The standard packaging unit size for the component shape is not taken into account by Setup
Center.