00900160-01_UM_ASM-ProcessLensDualLane_en - 第28页
2 Safety 2.2 Warning labels 28 Instruction Guide ASM ProcessLens Dual-lane 06/2018 2.2.3.13 Warning label PSUC - Power Supply Unit Cover Fig.22: Warning label for power supply unit cover [03113903-xx] (quantity per mach…
2 Safety
2.2 Warning labels
Instruction Guide ASM ProcessLens Dual-lane 06/2018 27
See fig. "Warning labels front view" [}19]and "Warning labels - Power supply unit and voltage dis-
tribution board" [}23] and "Warning labels - front view - inside - part 1" [}21]
2.2.3.9 Warning label W206
Fig.18: W206 [03009345-xx] (quantity per machine: 2)
Dangerous Voltages
The parts behind the cover are still live when
the main power switch is off.
The machine must disconnected from the mains
before servicing it.
NAFTA region: Risk of electric shock or
burn
See fig. "Warning labels - Power supply unit and voltage distribution board" [}23]
2.2.3.10 Warning label - Hazardous Voltage
Fig.19: Hazardous Voltage [03157800 -xx] (quantity per
machine: 2)
Hazardous Voltage
Disconnect power before servicing
► The machine must disconnected from the
mains before servicing it.
See fig. "Warning labels - Power supply unit and voltage distribution board" [}23]
2.2.3.11 Warning label P010 - Do Not Touch
Fig.20: Do not touch label (quantity per machine: 1)
Do not touch!
Do not touch the optical module.
See fig. "Warning labels - front view - inside - part 1" [}21]
2.2.3.12 Warning label HS - Hot Surface
Fig.21: Hot surface label [03031926-xx] (quantity per
machine: 1)
RISK OF BURNS FROM HOT SURFACE!
The protective cover of the power supply unit
can become hot during continuous operation.
► Take care when touching the protective
cover of the power supply unit.
See fig. "Warning labels - Power supply unit and voltage distribution board" [}23]
2 Safety
2.2 Warning labels
28 Instruction Guide ASM ProcessLens Dual-lane 06/2018
2.2.3.13 Warning label PSUC - Power Supply Unit Cover
Fig.22: Warning label for power supply unit cover [03113903-xx] (quantity per machine: 1)
See fig. "Warning labels - Power supply unit and voltage distribution board" [}23]
2.2.3.14 Warning label – Laser radiation
Fig.23: W laser class 2 [03134118-xx]
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
► Do not look into beam!
See fig. "Warning labels front view" [}19]
2.2.4 Other Labels
2.2.4.1 Label - External grounding point
External grounding point
Please observe chapter 2.8 ESD guidelines.
Label - General warning/attention [00359574-xx] (quantity per machine: 1)
See fig. "Warning labels front view" [}19]
2.2.4.2 Label – Ground
Ground
All ground termination points must be connec-
ted.
Label - Ground on various locations
2 Safety
2.3 Safety instructions for transporting the machine
Instruction Guide ASM ProcessLens Dual-lane 06/2018 29
2.3 Safety instructions for transporting the machine
Use a forklift truck with the following specification to carry the machine:
Fork length: min. 1800 mm
Carrying power: min. 6000 kg
Clear width between forks: min. 350 mm
WARNING
Risk of tipping
If the required specification cannot be applied to the forklift, there is a risk that the forklift
will tip over when carrying the machine.
Transportation of the machine is described in section 4.1 "Transport and delivery configura-
tion" [}55].