00195427-02_AI_HeadReconfigKitsD1D2_DE EN - 第54页
Assembly instructions Head Reconfiguration SIPLACE D1 / D2 Edition 03/2007 52 2 2 2 001 19863- Extension set for D1 single C+P 6 00119861- Reconfig.Kit C+P6 SIPLACE D1/2 1 x 03041229- 6 segm. Collect+Place head DLM3 cpl.…
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
51
2
00119862- Extension kit P+P for D1 single
03033628- Pick+Place Module/THK 1 x
03048530- Conversion kit P+P Module / D1 1 x
03048203- Silencer Assembly Pick and Place module 1 x
03048209- Bracket for flat silencer compl. 1 x
03006296- Silencer exhaust air 1 x
03006295- Filter cap 1 x
03046875- Standoff i/o M3x30 1 x
00316904- DIN 125-A 3.2-140HV-A2 1 x
03045031- DIN912-M3 x 12-A2-70 1 x
03048237- Exhaust connecting tube 1 x
03045048- DIN912-M4 x 12-A2-70 2 x
03045425- Camera Screen P+P Module / D1 1 x
03050786- Connection Pick and Place module / D1 1 x
03050787- Tube 1, retraction stroke cylinder 1 x
03050789- Tube 1, vacuum generator 1 x
03010908- Plug QSC-8H 1 x
00337891- Plug QSC-6H 1 x
00353446- Servo amplifier SDS60/1.0Z1-01 1 x
00353447- Servo amplifier SDS60/0,5D1 1 x
03050647- Flat Ribbon cable gantry head distributor P+P 1 x
03054109- Additional Parts for P+P Modul 1 x
03041840- Pipette change machine p. P+P head 1 x
03047406- BE-dropping completely p. P+P head 1 x
03045087- DIN912-M6 x 12-A2-70 4 x
03039370- S/F Sandwich plate f. mark IC-sensor 1 x
03042491- Components camera, stat. P+P (type36) 32x32 digit. 1 x
03045095- DIN912-M6 x 35-A2-70 4 x
03052012- DIN912-M4 x 16-8.8 zinc-plated DSP 4 x
03005958- DIN 913 - M 6 x 50-ST 2 x
00195427- Assembly instructions Head Reconfig. D1/D2 1 x
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
52
2
2
2
00119863- Extension set for D1 single C+P 6
00119861- Reconfig.Kit C+P6 SIPLACE D1/2 1 x
03041229- 6 segm. Collect+Place head DLM3 cpl. 1 x
03018637- Component camera, C+P (type29) 27x27 digital 1 x
03052012- DIN912-M4 x 16-8.8 zinc-plated DSP 4 x
00313069- DIN912-M4 x 10-A2-70 4 x
03054740- Connection DLM - Module / D1/2 1 x
03006383- Hose 12x8 AIR 1 x
03054742- Hose 6x4 reject placement circuit 1 x
03054743- Hose 8x5 stop circuit 1 x
00330249- Plug QSC-4H 1 x
00337891- Plug QSC-6H 1 x
03012564- Servo amplifier TBS/3S1 1 x
03002141- Servo amplifier SDS60/3Z1 1 x
03002142- Servo amplifier SDS60/1D1 1 x
00119864- Extension set for D1 single C+P 12
00119860- Reconfig.Kit C+P12 SIPLACE D1/2 1 x
03041228- 12 segm. Collect+Place head DLM3 cpl. 1 x
03014449- Component camera, C+P (type28) 18x18 digital 1 x
03052012- DIN912-M4 x 16-8.8 zinc-plated DSP 4 x
00313069- DIN912-M4 x 10-A2-70 4 x
03054740- Connection DLM - Module / D1/2 1 x
03006383- Hose 12x8 AIR 1 x
03054742- Hose 6x4 reject placement circuit 1 x
03054743- Hose 8x5 stop circuit 1 x
00330249- Plug QSC-4H 1 x
00337891- Plug QSC-6H 1 x
03012564- Servo amplifier TBS/3S1 1 x
03002141- Servo amplifier SDS60/3Z1 1 x
03002142- Servo amplifier SDS60/1D1 1 x
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
53
2.4 Safety instructions
WARNING
The safety instructions from the “Operational safety” chapter of the user man
ual and servicing
instructions take precedence over these instructions. 2
The SIPLACE placement machines are supplied with mains voltage.
Consequently parts of these systems carry dangerous voltages! Th
is voltage is present at certain
modules inside the machine base, even when the machine is switched off at the main power
switch.
Incorrect handling of the placement machine or touching live parts of the machine can result in
death or se
vere injury, and considerable damage to equipment.
BEFORE starting any work, shut down the operating system correctly,
then switch the machine
OFF at the main power switch and disconnect from the main power supply. In addition, the com-
pressed air supply must be switched off at the compressed air unit's main valve in the machine
base and
vented by actuating the needle valve on the compressed air unit.
There is DANGER for heart pacemaker wearers in the vicinity of the linea
r motors, as described
in detail in the "Special safety instructions for working in the vicinity of strong magnetic fields" sec-
tion of the user manual and service manual.
Always follow the accident prevention regulations, DIN or other sta
ndards and special safety
rules applicable in your country.
Pay attention to the information concerning residual voltages in
the Operational Safety chapter.
Follow the ESD regulations as described in the operationa
l safety section of the operating
instructions.
During the retrofit, always secure the machine to prevent access by other people and to prevent
it being switched on
again. The procedure is described in the “Locking the machine…” section of
the user manual.
Working with the SITEST program further increases the risk of accident.
The SITEST program must only be used by authorized and trained personnel. 2
2.4.1 Definitions
PLEASE NOTE 2
CAUTION 2
2
2 2
2
2