00195427-02_AI_HeadReconfigKitsD1D2_DE EN - 第72页
Assembly instructions Head Reconfiguration SIPLACE D1 / D2 Edition 03/2007 70 : Download the P&P Head firmware. Abb. 2.7.13 Firmware download as example HF (D-series simila r) 2 From SW version 604 upwards the down l…
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
69
2.7.8 Final mechanical work
This mechanical work must be completed prior to Firmware download (Chapters 1.7.9 and 1.8.8),
(Chapter 2.7.9 and Chapter 2.8.8) otherwise calibration of the nozzle changer will not be
poss
ible. 2
2
: Mount the waste chute and fix in place.
: Mount the nozzle changer and screw tight (2 screws M6x12).
: Fit the waste bin holder (2 screws M6x14).
: Insert the new reject bin.
: Doc the component table or position the tape container and dock the WPC4.
2
2.7.9 Firmware download
Shown in this chapter is the menu of the HF-series. In principle, this is comparable with the D-
series. 2
The mechanical work must be completed prior to the Firmware download, otherwise calibration
of the pipette changer will not be possible. 2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
70
: Download the P&P Head firmware.
Abb. 2.7.13 Firmware download as example HF (D-series similar)
2From SW version 604 upwards the download is not restricted to SIPLACE-Service anymore. 2
Assembly instructions Head Reconfiguration SIPLACE D1 / D2
Edition 03/2007
71