QP341 351E规格书.pdf - 第22页
6.1.20 Stick Feeders (Optional) Two types of stick feeders are available, type 1 (width: 7 to 28 mm) and type 2 (width: 25 to 48 mm). Loading on MFU-6E or PFU-3E Current stick feeder models are supported by the MFU-6E. S…
6.1.18 Rear Operation Panel (Optional)
For ease of operation, an operation panel can also be attached at the rear of the
machine.
6.1.19 Mechanical Feeders (Optional)
8, 12, 16, 24, 32, 44, 56, 72, and 88 mm feeders available to handle all taping sizes.
• MFU-6E Feeders
Notes: The tape index lever on IPC feeders must be changed prior to use.
The feeding pitch for 12 mm and wider tape feeders can be adjusted in 4 mm
increments up to 60 mm using the dial on the feeder controls.
8 mm double channel feeder combinations are detailed in the table below.
Left
P4 paper
P4 embossed
P2 paper
P2 paper
P4 paper
P4 embossed
P2 paper
P4 paper
Right
QP3S046
Left and right facing the machine from the supply unit side.
Feeder type Tape width
8 – 56 mm MFU-6E
MFU-6E
PFU-3E
P4 x 1
P8 x 1
P12 x 1
P4 x n
P8 x n
P12 x n
Paper tape
Embossed tape
Paper tape
Embossed tape
P2 x 1
P4 x1
Variable
Embossed tape
P2 x 1
P4 x 1
Variable
(8 mm:
under development)
(12 - 72 mm,
88 mm special order)
Feeding pitch Tape type Feeder unit
BFC type
16 mm Motor Feeder
8 mm double channel feeder
QP3S025
8 – 24 mm
(32 – 56 mm:
under development)
(72, 88 mm
pending)
– 18 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
6.1.20 Stick Feeders (Optional)
Two types of stick feeders are available,
type 1 (width: 7 to 28 mm) and type 2
(width: 25 to 48 mm).
Loading on MFU-6E or PFU-3E
Current stick feeder models are
supported by the MFU-6E. Stick
feeders for the PFU-3E are under
development. Stick feeders are
supported on the removable supply
side of the machine, and at the front
side of the machine under special
request.
• Stick feeder types
• Stick stacking height: Max. 50 mm
• Stick length: Min. 400 mm – Max. 600 mm
• Supply time: 1.5 sec./part (MFU loading type)
• Conveyance method: Combination of cassette and chute
Stick width
QP3S029
Type - 1
Type - 2
7 – 28 mm
25 – 48 mm
Stick width
QP3S030
QP3S028
– 19 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
• Cassette and chute for SOICs (MFU loading type)
• Cassette and chute for PLCCs and SOJs (MFU-6)
The method of selecting the cassette and chute for PLCC and SOJ parts is
indicated below.
Lead count
Feeder
18
20 28 32 44 52 68 84 100
Type 1 Type 2
QP3S033
6.01 to 6.40
6.41 to 7.20
7.21 to 8.20
8.21 to 9.50
9.51 to 11.00
11.01 to 12.50
4.51 to 6.50
6.51 to 8.50
8.51 to 11.00
11.01 to 13.00
13.01 to 15.00
15.01 to 17.00
17.01 to 19.00
1.31 to 1.80
1.81 to 2.30
2.31 to 2.90
IC width = W
IC thickness = T IC length = L
A
B
C
D
E
F
1
2
3
C2D
A
B
C
D
E
F
G
QP3S031
– 20 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)