QP341 351E规格书.pdf - 第27页

7. Machine Control System 7.1 Machine Control Specifications Note: Pentium  is a registered trademark of Intel Corporation. FujiCam is the host system used for assembly data administration and transmission. It is necess…

100%1 / 34
6.1.24 Roller Conveyor (Optional)
The roller conveyor employs rollers under the conveyor belt to improve PCB
conveyance.
The roller conveyor is required when the PCB weight (including supporting
pallet) exceeds 1 kg. PCBs of up to 2 kg in weight can be conveyed using rollers.
6.1.25 Handy Terminal (Pending) (Optional)
• Allows the operator to view and enter device-related data that is normally
displayed at the machine monitor.
• Equipped with a pen type entry device for use during bar code reading and
changeover. Feeder setting errors can be prevented by using the Handy
Terminal.
• Power Feeder loading positions can be checked by reading the feeder ID.
6.1.26 Kitting Station (Pending) (Optional)
The network established between the Kitting Station and the feeders/PFUs gives
the operator access to reports relating to part and reel types, feeder and splicing
data, and device slot data in the program. The Kitting Station is a CIM tool
designed to maximize production efficiency.
Note: The computer on which the Kitting Station software is installed must be
prepared in advance by the user.
6.1.27 HELPS (Pending) (Optional)
HELPS is Fuji's automatic production program changeover system, and stands
for High Efficiency Line Production System. The main functions of the HELPS
system are: • Automatic program changeover
• Conveyor width changeover
• Display of changeover instructions for the operator.
6.1.28 Other
Feel free to talk to us or to your Fuji representative regarding customization of
your order or clarification of any points in this document.
– 23 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
7. Machine Control System
7.1 Machine Control Specifications
Note: Pentium
is a registered trademark of Intel Corporation.
FujiCam is the host system used for assembly data administration and transmission.
It is necessary to install the FujiCam software on a suitable computer. The computer on
which FujiCam will be installed should be provided by the user prior to taking delivery
of the machine.
The ethernet cable (100 meters of category 5 10BASE-T) should be prepared by the user
in advance.
Items
CPU
Recipe storage capacity
Data input method
Specifications
333 MHz (Intel Pentium
II)
5000 sequences/recipe
Unlimited (as long as disk space is available)
FujiCam
0.01 mm for X-, Y-, ZA-, ZB-, and ZC-axis.
0.01° for the Q
A-, QB-, and QC-axis.
Communication Ethernet (can be made SECS/GEM compliant)
Maximum number of input sequences
For PCB positioning and part pick-up
displacement
Coordinate input method
Absolute
Controllable axes 8 axes (X, Y, Z
A, ZB, Zc, QA, QB, QC)
Tray unit (T
Y, TZ)
Flux unit (pending)
Main control unit Single board computer
Control panel
Color LCD touch panel
Optical correction
QP3S038
– 24 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
8. Machine Drawings
8.1 Dimensions
8.1.1 QP-341E-MM (MF + MFU-6E)
Note: The rear operation panel in the figure above is an optional feature.
– 25 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)