QP341 351E规格书.pdf - 第4页

1. Introduction 1.1 Machine Outline The QP-341E/351E is a limited footprint multi-function high-precision SMD mounter. The machine is ideally suited for positioning after a high-speed chip shooter as a fine pitch mounter…

6.1.10 Area Sensor (Optional) .........................................................................................16

6.1.11 Side Covers (Optional).........................................................................................16

6.1.12 Smoke Colored Acryl Covers (Optional)...............................................................16

6.1.13 Lead Coplanarity Check (Optional) (Under Development)....................................17

6.1.14 Placing Pressure Control (Optional) (Under Development)..................................17

6.1.15 Parts Confirmation Sensor (Optional) (Under Development)................................17

6.1.16 Insertion Control Placing (Pending) (Optional)......................................................17

6.1.17 Vacuum Back-up Pins (Optional)..........................................................................17

6.1.18 Rear Operation Panel (Optional) ..........................................................................18

6.1.19 Mechanical Feeders (Optional).............................................................................18

6.1.20 Stick Feeders (Optional) .......................................................................................19

6.1.21 Feeder Stand (Optional) .......................................................................................21

6.1.22 Feeder Set-up Jig (Optional).................................................................................22

6.1.23 Tape Splicer for Power Feeders (Optional)...........................................................22

6.1.24 Roller Conveyor (Optional)....................................................................................23

6.1.25 Handy Terminal (Pending) (Optional) ...................................................................23

6.1.26 Kitting Station (Pending) (Optional) ......................................................................23

6.1.27 HELPS (Pending) (Optional).................................................................................23

6.1.28 Other.....................................................................................................................23

7. Machine Control System ..................................................................................24

7.1 Machine Control Specifications ..........................................................................................24

8. Machine Drawings.............................................................................................25

8.1 Dimensions.........................................................................................................................25

8.1.1 QP-341E-MM (MF + MFU-6E)..............................................................................25

8.1.2 QP-341E-MM (PF + PFU-3E)...............................................................................26

8.1.3 QP-351E-MM (MFU-6E + MFU-6E)......................................................................27

8.1.4 QP-351E-MM (PFU-3E + PFU-3E).......................................................................28

8.2 Location of the Leveling Bolts (QP-341E-MM) ...................................................................29

Notes: The official model name of this machine is QP-341E-MM and QP-351E-MM. This name

should always be used on the associated documentation when shipping a unit or units of this

model to a third country.

Since this equipment contains strategic materials that are covered by international treaty, it is

necessary to obtain government permission to export it to a third country.

Abbreviated versions of the official model name may appear in this and other related documents.

– ii – QP-341E-MM/QP-351-MM Specifications

Preliminary (January 10, 2000)

1. Introduction

1.1 Machine Outline

The QP-341E/351E is a limited footprint multi-function high-precision SMD mounter.

The machine is ideally suited for positioning after a high-speed chip shooter as a fine

pitch mounter, or used in a multiunit, multipurpose line for placing anything from odd-

form components to flip chips.

The machine occupies a minimum of floorspace, with the width of the QP-341E withheld

to 835 mm (or 916 mm for the QP-351E), and a conveyor length of 837 mm

(918 mm for the QP-351E).

The machine employs a triple-shafted placing head, with independent rotational and

vertical movement for each of the attached nozzles.

IP series mechanical feeders and power feeders can be loaded.

1.2 Features

• QP-341E/351E can be used for small or large scale production because of its

compactness and excellent line configurability.

• Configure the production line to suit your throughput requirements, and the kind of

parts to be placed.

• Expand your supported part range using Fuji's two-camera system.

• Slim frame occupies the minimum of floorspace.

• Placing accuracy of ±0.066 mm (3σ) for regular parts, and ±0.03 mm (3σ) for parts

such as QFPs with leads on all four sides.

• Supports the same Power Feeders used with the QP-132E and the NP-133E, in

addition to mechanical feeders (also compatible with the QP-242E and IP-3).

• Supports the handling of large boards of up to 457 x 508 mm. The PFU-3E or the

MFU-6E can be attached/detached on both the front and rear side of the machine

enabling easy maintenance and changeover.

– 1 – QP-341E-MM/QP-351-MM Specifications

Preliminary (January 10, 2000)

2. Machine Data and Structure

2.1 Machine Data and Operating Environment

Notes : Power Source: The built-in transformer has primary side taps of 200, 210, 220, 230, 380, 400,

415, 460 and 480 Volts.

A dedicated power source, not shared with other large equipment, should be used in order to

avoid problems with electrical noise, voltage fluctuations, high-frequency distortions, and other