00192471-03 - 第134页
4 Component handling User Manual SIPLACE HS-50 4.5 Used tape c utter Software Version SR.50x. xx 01/2006 US E dition 134 The use d tape guide c hannels (see it em 1 in Fig. 4.5 - 3 ) are lo cated upstr eam of the feeder …
User Manual SIPLACE HS-50 4 Component handling
Software Version SR.50x.xx 01/2006 US Edition 4.5 Used tape cutter
133
4.5.2 Feeding the used tape to the cutter
Fig. 4.5 - 3 Feeding the used tape to the cutter
(1) Used tape guide channel
(2) Channel for removal of the used tape
(3) Tape cutter
(4) Waste tape chute
4 Component handling User Manual SIPLACE HS-50
4.5 Used tape cutter Software Version SR.50x.xx 01/2006 US Edition
134
The used tape guide channels (see item 1 in Fig. 4.5 - 3) are located upstream of the feeder mod-
ules. They are positioned directly above the used tape cutters (see item 3 in Fig. 4.5 - 3
). 4
The tape is automatically guided through the used tape guide channel into the used tape cutter
below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape
then passes via the waste tape chute (see item 4 in Fig. 4.5 - 3
) into the component table’s waste
container. 4
4
Fig. 4.5 - 4 Removable waste tape container in the component changeover table
(1) Component changeover table
(2) Removable waste tape container
4
User Manual SIPLACE HS-50 4 Component handling
Software Version SR.50x.xx 01/2006 US Edition 4.6 Component changeover tables
135
4.6 Component changeover tables
4.6.1 Safety instructions for docking and undocking the component changeover
table
WARNING 4
Æ Never reach into the gaps between the component changeover table and the placement sys-
tem frame while the machine is running (item 1 in Fig. 4.6 - 1
).
Æ Always check that the component changeover table is docked on the placement system before
connecting or disconnecting the power cable for the component changeover table at the socket
on the placement system (item 2 in Fig. 4.6 - 1
).
Æ NEVER connect the connecting cable for the component changeover table to the socket on the
placement system and then operate the component table outside the machine via the com-
pressed air control unit (item 3 in Fig. 4.6 - 1).
4
Fig. 4.6 - 1 Safety instructions for the component changeover table