00192471-03 - 第150页
5 Station extensions User Manual S IPLACE HS-50 5.3 Dual conve yor Software Version SR.50x.xx 01/2006 US E dition 150 5.3 Dua l conveyor 5.3.1 St ructure of the dual conveyor The convey or belts are dr iven by DC mo tors…
User Manual SIPLACE HS-50 5 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 5.2 Component barcode
149
Options in the event of an illegible barcode 5
Æ Deactivate the refill check from the Machine options menu.
Æ Enter the Barcode manually.
5.2.3 Operation
Æ
Select the "Empty tracks" view from the Set-up menu.
Æ Use the barcode reader to scan the desired track barcode.
If the track is contained in the set-up and the component has a barcode, the "Set-up check with
barcode" dialog will appear, specifying the corresponding track.
PLEASE NOTE 5
You can open the dialog by clicking on the desired track or by clicking on the "Set-up check
with barcode" button. 5
The track can be filled once the comparison has been carried out and the return barcode has been
scanned.
5.2.4 Technical data
Component barcode
Max. resolution 0.13 mm
Scanning speed 36 scans/sec.
Laser class IEC class 2
Degree of protection IP 64
Compatible barcode types
Code 39 (normal / FULL ASCII)
EAN/UPC (family with/without ADD ON
CODABAR
INTERLEAVED 2/5
NORMAL 2/5 (5 bars)
(others available upon request)
5 Station extensions User Manual SIPLACE HS-50
5.3 Dual conveyor Software Version SR.50x.xx 01/2006 US Edition
150
5.3 Dual conveyor
5.3.1 Structure of the dual conveyor
The conveyor belts are driven by DC motors. There is a lifting table for holding the PCBs in each
processing area. The width of the PCB conveyor can be adjusted either via the menu or using the
line computer.
Fig. 5.3 - 1 Structure of the dual conveyor
(1) Feeding area (2) Processing area 1
(3) Intermediate area (4) Processing area 2
(5) Output area (6) Lifting table, processing area 1
(7) Lifting table, processing area 2 T1 Transport track 1
T2 Transport track 2
User Manual SIPLACE HS-50 5 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 5.3 Dual conveyor
151
5.3.2 General
As the name suggests, the dual conveyor has two transport tracks, which are electrically and me-
chanically independent of one another. In the Standard version, the right-hand side is the fixed
side. There is another version, however, in which the left-hand side is the fixed side.
5.3.3 Defining the transport tracks
The right transport track (viewed in the transport direction) is designated "Transport 1" and the left
as "Transport 2" (see Fig. 5.3 - 1
).
5.3.4 Asynchronous conveyor mode
5.3.4.1 Description
In asynchronous mode, only one PCB in a transport track is processed. At the same time, another
PCB in the second transport track is moved into the placement position. This saves the full con-
veying time of one PCB, thus considerably increasing performance, particularly for PCBs with a
short cycle time.
5.3.4.2 Function
Once the machine has received the job data (cluster, set-up), the PCBs on the feeding belts are
continuously transported to the available processing belt (provided that the belt is free) throughout
the placement operation. The placement sequence starts as soon as a PCB has moved onto the
relevant processing belt. The PCBs are processed one after another.
If the placement sequence is interrupted, the conveyor interface will be disabled and the PCBs
currently on the processing belts will be completed.
The conveyor interface is disabled or enabled simultaneously for both transport tracks.
5.3.5 Controlling the dual conveyor with the Single functions menu
Control of the dual conveyor and the Single functions menu are described in the manual ’Getting
started’.