00192471-03 - 第51页
User Manual SIPLAC E HS-50 2 Oper ational Safety Software Version SR.50x.xx 01/2006 US Edition 2.1 Safety instructions 51 2.1.9 W arning signs on the placeme nt syst em The foll owing dia gram sh ows the position of the …
2 Operational Safety User Manual SIPLACE HS-50
2.1 Safety instructions Software Version SR.50x.xx 01/2006 US Edition
50
2.1.8 Important notes on environmentally-friendly disposal of materials and
components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the
installation, dismantling or operation of the system. 2
PLEASE NOTE 2
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts. 2
Æ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
User Manual SIPLACE HS-50 2 Operational Safety
Software Version SR.50x.xx 01/2006 US Edition 2.1 Safety instructions
51
2.1.9 Warning signs on the placement system
The following diagram shows the position of the warning signs on the basic machine. 2
2
Fig. 2.1 - 1 Warning signs on the basic machine
2
Item 1 in Figure 2.1 - 1
showing the warning signs on the basic machine 2
1
Warning
!
All parts marked with this sign
are still energized -
even when the main switch
is switched off !
2 Operational Safety User Manual SIPLACE HS-50
2.1 Safety instructions Software Version SR.50x.xx 01/2006 US Edition
52
2
Item 2 in Figure 2.1 - 1
showing the warning signs on the basic machine in German 2
2
Item 3 in Figure 2.1 - 1
showing the warning signs on the basic machine 2
Warnung !
Diese Maschine kann auf Grund elektrischer Spannungen und Ströme sowie
auf Grund mechanischer, thermischer oder chemischer Vorgänge Gefahren
bringen, die zu Körperverletzungen und Sachschäden führen.
Unbedingte Voraussetzung für den Betrieb der Maschine ist deshalb, daß sie
- nur für den vorgesehenen Zweck verwendet wird
- nur mit Personal betrieben wird, das die erforderliche Qualifikation
besitzt und eine Schulung und Anweisung erhalten hat
- in ihren Schutzeinrichtungen unverändert bleibt. Überbrücken von
Schutzschaltern, Entfernen von Schutzeinrichtungen sind unzulässig.
Wenn beim Betrieb der Maschine wesentliche Gefahren erkannt werden,
dann ist der Betreiber verpflichtet, dem Hersteller eine schriftliche Mitteilung
zu machen, damit dieser entsprechende Maßnahmen ergreifen kann.
2
3
Warning !
The operating voltages and currents of the machine, together with its
mechanical, thermal and chemical characteristics can result in personal injury
or damage to the machine if the correct guidelines are not followed.
The mandatory requirements for operating the machine are as follows:
- the machine must only be used for its intended purpose
- the machine must only be operated by personnel having the required
qualifications and who have received the necessary training and
instructions
- the protective facilities in and on the machine must remain unchanged.
It is not permitted to bypass safety switches or remove any safety
facilities.
If, while the machine is in operation, any fault is discovered, the operator is
obliged to report this in writing to the manufacturer so that corrective
measures can be taken.