00195372-0102_AI_Vakuumpumpe_D1D2_DE EN - 第32页
2 Assembly instructi ons for vacuum pump D1 / D2 11/2006 Edition 32 2.6 Changes to the placement head Fig. 2.6.1 HF-vacuum G enerator (Initial State) 2 2 2 2 2 2 2 2 2 2 2 2 2
D1 / D2 2 Assembly instructions for vacuum pump
11/2006 Edition
31
: Mount the vacuum distribution block on the back.
: Close off both compressed air main shut-off valves (red).
Fig. 2.5.2 Compressed Air tubes in the vacuum distribution block
2
: Pull in each case the upper compressed air tube (PUN 12 00344918-) out of the Y fitting (next
to the shut-off valves).
: Put them into the vacuum distribution block
: Put the blanking plugs (QSC-12H from the vacuum distribution) into the open Y pieces next to
the shut-off valves.
2
2 Assembly instructions for vacuum pump D1 / D2
11/2006 Edition
32
2.6 Changes to the placement head
Fig. 2.6.1 HF-vacuum Generator (Initial State)
2
2
2
2
2
2
2
2
2
2
2
2
2
D1 / D2 2 Assembly instructions for vacuum pump
11/2006 Edition
33
: Remove the cover of the vacuum generator plate (2 screws).
Fig. 2.6.2 Remove HF-vacuum Generator
2
: Open the cable clip at the gantry distributor.
: Remove the ribbon cable from the gantry distribution plate.
: Remove the tubes from the connectors.
2
2
2
2
2
2
2
2
2
2
2