00196353-04_JG_X-FeederTestStation_EN - 第6页
Introduction Use of Symbols 6 – U s e o f S y m b o ls Work step Repair (see service manual) Note as used in this Operation Manual provides information on the pr oduct or indicates a part of the Operation M anual that re…
Introduction Scope of Delivery
5
Introduction– Scope of Delivery
The scope of delivery includes:
▪ 1 X-feeder test box
, item no. 03054548-01
▪ 1 power pack, item no. 03133449-01
▪ 1 CAN cable
▪ 1 Single Slot EDIF with plate and 2 screws
Introduction Use of Symbols
6
– Use of Symbols
Work step
Repair (see service manual)
Note
as used in this Operation Manual provides information on the product or indicates a
part of the Operation Manual that requires particular attention.
Caution
as used in this Operation Manual means that slight injury or damage to equipment may
occur if the caution instructions are not followed.
Warning
as used in this Operation Manual means that death, severe injury or considerable
damage to equipment may occur if the warning instructions are not followed.
Danger
as used in this Operation Manual means that death, severe injury or considerable
damage to equipment will occur if the danger instructions are not followed.
Introduction Safety Instructions
7
– Safety Instructions
DANGER
Type and source of hazard
The safety instructions in the manual for the relevant SIPLACE X feeder module take precedence.
This instruction manual and the safety information within are targeted at use of the checking device and the
feeder module, separately from the machine .
Consequences
The "external feeder module power supply" is connected to the 230V AC (Europe) / 110V AC (USA); 50/60
Hz line power supply. When connecting to the 110V supply, you do not need to perform any conversions or
switch over the setting on the power pack.
Technical data for external power supply:
Power output:130 Watt
Input nominal current (max.): 3.2 A
Output nominal current (max.): 4.3 A
The "external feeder module power supply" must not be opened or manipulated.! (Danger of electric shock)
Consequences
Always observe the applicable accident prevention and VDE regulations, plus the specific safety regulations
for handling laboratory equipment and systems outside the machine, as applicable in your country.