FCM_User Reference Manual.pdf.pdf - 第146页
MIS User Re ference Manual 4022 5 91 96082 5-54 F CM Mult ifl ex 02.02 ✱✱ Detailed Infor mation ▼ Display ed Info rmatio n The [M ach ine p erf orm anc e ...] re por t gi ve s a lis t of all ma ch ine e rrors th at occur…
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 5-53
MIS
5.3.5 Machine Performance
5.3.5.1 [Reports] > [Machine performance...]
TABLE 5-24 Quick Reference
fcm0552a.tif
SCREEN 5-43 [Machine performance...] screen example
Actions ■ select [Functions...] in the MIS pull-down menu
■ select [Reports]
■ select [Machine performance...]
Conditions ■ supervisor access level
■ order active
Information ■ FCM Multiflex module involved (e.g. Base, Transport etc.)
■ FCM Multiflex machine identification and serial no.
■ MIS period name + start/stop date/time
■ action spec name
■ order name
■ report date/time
■ display of all machine errors by
• error type
• number of errors
• error cause
• operator response time
• down time (excluding operator response time)
■ display of all servo warnings by
• number of tracking warnings
• drift specification
Display Options -
MIS
User Reference Manual 4022 591 96082
5-54 FCM Multiflex 02.02
✱✱Detailed Information
▼Displayed Information
The [Machine performance...] report gives a list of all machine errors that
occurred. Besides, it lists all servo warnings occurrences (tracking warnings, drift).
The information is given per FCM Multiflex module.
On entry, a report on the module
[Base] is showed. Next, the module [Transport],
[BVM], or one of the various placement modules can be selected to have their
reports successively shown on the screen.
Report text explanation
See screen examples SCREEN 5-20 and SCREEN 5-43
TABLE 5-25
Report text Explanation
Errors: error type description of the error
error cause a clue is given here on the (possible) cause of
the error by a numeric code
the meaning of the used numeric codes is
appointed in the [Parameters] > [Error
causes] list as filled
in by the supervisor, see section 3.9.3
amount the number of error occurences
down time the FCM Multiflex down time per error -
excluding operator response time - expressed in
hh:mm:ss, where hh = hours, mm = minutes,
and ss = seconds
note that “10 seconds” is denoted as only “10”
response time the time between occurrence of the error and
the moment the operator started with recovery
(the Waiting-for-operator time, see also FIGURE
5-8)
Module: the part of the FCM Multiflex for which the report
has been generated; this can be Base, Trans-
port, BVM, or one of the used placement
modules (e.g. WVM1, LAS9 etc.)
Servo diagnos-
tics:
Servo ..... tracking
warnings:
the number of times the difference between
aimed and achieved motion (“slip”) of the servo
system exceeded a fixed limit;
for “.....” the concerned servo system is
specified
Drift:
the total number of servo increment pulses - as
generated by the servo motor encoder - that did
not match the nominal value
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 5-55
MIS
fcm0552a.tif
SCREEN 5-44 [Machine performance...] module Base screen example
fcm0553a.tif
SCREEN 5-45 [Machine performance...] module Transport screen example