FCM_User Reference Manual.pdf.pdf - 第86页

Mount Program User Re ference Manual 4022 5 91 96082 4-40 F CM Mult ifl ex 02.02 Placemen t Modul e Act iviti es (conti nued) AS LAS/W VM 3 CO M MEN T CO M MEN T Pl acement module ac tion s f or posi ti on 3 CO M MEN T C…

100%1 / 306
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 4-39
Mount Program
syntax: feeder_pos_nr + pick_pos_nr + push_count + max_repick_pick
+ max_repick_align + pick_position + nr_align_actions +
pick_refire_perc + align_refire_perc + align_error_perc +
place_error_perc [+ component_pick_vector]
■ pick_refire_perc (prf)
type: integer
range: 0..100
description: The percentage of the (calibrated) vacuum sensor signal above
which the component is repicked immediately after the pick
action.
■ align_refire_perc (arf)
type: integer
range: 0..100
description: The percentage of the (calibrated) vacuum sensor signal above
which the component is repicked after having been aligned. This
value should be less than align_error_perc!
■ align_error_perc (ale)
type: integer
range: 0..100
description: The percentage of the (calibrated) vacuum sensor signal above
which the component is assumed to have dropped from the nozzle
during alignment. This value should be larger than
align_refire_perc!
■ place_error_perc (ple)
type: integer
range: 0..100
description: The percentage of (calibrated) vacuum sensor signal below which
the component is assumed to retained after placement.
■ component_pick_vector (WVM only !)
• component_pick_X (c_pick_x)
type: real
range: ...(mm)
description: X-offset of the pickup point of the component, relative to the
component’s coordinate system.
• component_pick_Y (c_pick_y)
type: real
range: ... (mm)
description: Y-offset of the pickup point of the component, relative to the
component’s coordinate system.
Mount Program
User Reference Manual 4022 591 96082
4-40 FCM Multiflex 02.02
Placement Module Activities (continued)
AS LAS/WVM 3
COMMENT
COMMENT Placement module actions for position 3
COMMENT
COMMENT PPU_id /nozzle_id /clow/chgh/cidx
MUP VISION 4900 20 50 1
BOARD_ROTATION 0
COMMENT index coordinates are relative to placement module origin
COMMENT indx /brd /refholex /refholey /board_x /board_y
INDEX 1 3 -7.000 143.500 269.000 138.000
INDEX 2 3 3.000 143.500 339.000 138.000
INDEX 3 2 -157.000 143.500 119.000 138.000
INDEX 4 2 -77.000 143.500 199.000 138.000
COMMENT feed/pick /feeder_id /type /component_id /smd info [/feeder_phi /f_pick_x /f_pick_y]
FEEDER 301 1 T12-P T 93697451 SO-8 0.0
FEEDER 303 1 T12-P T 93697711 SO-8 0.0
FEEDER 307 1 T12-P T 93697706 SO-8 0.0
FEEDER 401 1 T16-P T 286114465Z SO-16 0.0
FEEDER 404 1 T24-P T 286114414A VSOP.CA 0.0 0.2 0.1
COMMENT pick coordinates are relative to placement module origin
COMMENT fd /pk/psh/mrp/mra/pick_x /pick_y/pick_phi/na/prf/arf/ale/ple [/c_pick_x/c_pick_y]
PICK 301 1 1 1 0 19.000 77.000 90.0 1 50 28 80 80
PICK 303 1 1 1 0 51.000 77.000 90.0 1 50 28 80 80
PICK 307 1 1 1 0 99.000 77.000 90.0 1 50 28 80 80
PICK 401 1 1 1 0 187.000 77.000 90.0 1 50 30 80 80
PICK 404 1 1 1 0 235.000 77.000 90.0 1 50 30 80 80 0.2 0.1
COMMENT : In case a deviating dump position is needed enter
COMMENT : DUMP position_x position_y
DUMP 120.000 117.000
COMMENT mount coordinates are in board coordinates
COMMENT comp_ref /ci/ix/bd/fd /pk /mnt_x /mnt_y /mnt_phi /align_phi
MOUNT U2313 1 1 3 303 1 -198.780 85.390 0.0 0.0
MOUNT U4404 1 1 3 301 1 -210.080 116.740 0.0 0.0
MOUNT U2905 1 2 3 401 1 -253.130 71.040 90.0 90.0
MOUNT U2909 1 2 3 303 1 -265.830 75.870 90.0 90.0
...
...
...
4022 591 96082 User Reference Manual
02.02 FCM Multiflex 4-41
Mount Program
4.2.6.6 DUMP
syntax: dump_X_position + dump_Y_position
■ dump_X_position (position_x)
type: real
range: 19.000 ... 99.000 (mm) for LAS Modules
19.000 ... 199.00 (mm) for WVMs
description: X-value of the dump position relative to the Placement
Module’s origin.
■ dump_Y_position (position_y)
type: real
range: 77.000 ... 590.000 (mm)
description: Y-value of the dump position relative to the Placement
Module’s origin.
4.2.6.7 MOUNT
syntax: component_elref + circuit_nr + index_nr + board_pos_nr +
feeder_pos_nr + pick_pos_nr + mount_position +
align_orientation
■ component_elref (comp_ref)
type: string
length: 1..12
description: Electrical reference (item code) of the component. Together
with the circuit_nr this uniquely identifies the location of the
component on the board.
■ circuit_nr (ci)
type: integer
range: 1 .. 999
description: Denotes on which circuit the component is located within the
board.
When using a BVM, a maximum 128 circuits can be used per
product (board). If no BVM is used, the maximum number of
circuits per product is 256.
■ index_nr (ix)
type: integer
range: 1..9
description: The number of the transport index to which the record
applies.
■ board_pos_nr (bd)
type: integer
range: 1..30
description: The position number of the board for which the placement is
meant. The boards get a new board_pos_nr on the return
movement of the transport beam.