00194340-01 - 第24页

Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP) Edition 04/2006 Figure 2.4.1-9 Y-Union at the end of line → Place the control unit with respect to placem ent areas at location shown in Fi…

Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)

Edition 04/2006

Figure 2.4.1-8 Pneumatic tubing layout for dual conveyor

2-19

Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)

Edition 04/2006

Figure 2.4.1-9 Y-Union at the end of line

→ Place the control unit with respect to placement areas at location shown in Figure 2.4.1-8

and connect tubing (Item No.: 03031604-FS) from Y-Union to control unit.

NOTE

Layout shown in Figure 2.4.1-8 applies to Single Conveyor machine as well. User can skip

tubing laying on placement area 3 & 4.

2-20

Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)

Edition 04/2006

2.4.2 Electrical installation

→ Open the cover on top of conveyor’s conversion card.

→ Loosen the hexagon pillar on conveyor’s conversion board. Replace it with I/O Card

Assembly (Item No.: 03031464-FS) provided.

Replace with I/O

Card Assembly

(shorter hexagon

pillar at the

bottom)

Figure 2.4.2-1 Replacing hexagon pillar with I/O Card Assembly

Figure 2.4.2-2 Fix I/O card assembly

2-21