00194340-01 - 第46页
Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP) Edition 04/2006 1 Figure 5.2-2 Teach pendant (1) Teach pendant (Item No.: 03031428-0 1) 5.3 Spare parts for control unit & others 1 Fig…
Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)
Edition 04/2006
5.2 Spare parts for control unit & others
2
1
4
3
5
6
Figure 5.2-1 Spare parts for control units
(5) AVSP Control Unit Vacuum Valve Assembly (Item No.: 03047481-01)
(6) Vacuum Pump MINI L14 (Item No.: 03031306-01)
(7) AVSP Controller Unit Unclamp Solenoid valve (Item No.: 03031310-01)
(8) AVSP Controller Unit Up/Down Solenoid valve (Item No.: 03031311-01)
(9) AVSP Controller Unit Vacuum Switch Assembly (Item No.: 03031312-01)
(10) Air operated valve (Item No.: 03031304-01)
5-41
Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)
Edition 04/2006
1
Figure 5.2-2 Teach pendant
(1) Teach pendant (Item No.: 03031428-01)
5.3 Spare parts for control unit & others
1
Figure 5.3-1 Spare parts for air service unit
(2) Air Filter AF30-03 (Item No.: 03039711-01)
5-42
Retrofit Instructions & User’s Manual / Automatic Vacuum Support Pins (AVSP)
Edition 04/2006
6 Troubleshooting Guide
6.1 Not possible to enter teaching mode
→ Check if the AVSP option is enabled. Status LED will light ON continuously if AVSP is
enabled or blinks shortly if vacuum is disabled.
→ Check if machine’s reference run completed. Reference run of machined is required to
perform teaching function correctly.
6.2 Teaching mode: Pin(s) not reset to lowest
stroke
→ Check the all tubing connection and the air supply. The air supply should be 5.0 bar.
→ Check if manual override on solenoid valve is activated. Make sure it is not activated.
Manual
Override
Figure 6.2-1 Manual override for solenoid valve
6-43