Nordson-EFD-MeterMix-Guide - 第8页

8 400 / 450 Autovalves Accessories CARBON STEEL PIPE ADAPTERS Part Part # Description 7702420 90° Elbow w/3/8 " FNPS 7702425 Straight Adapter w/3/8 " FNPS TRIGGER HANDLES If using an electric handle, a solenoid…

Series 450RC Recirculating Autovalve

7702217 450RC Autovalve

Aluminum Valve, Single Air Cylinder w/ Snuff Back,

GT Seals

Order handle separately; see Autovalve Accessories

for details.

Manifold

Seat Plate

Valve Body

Tie Plate

Lip Seal

O-ring

Air Cylinder Body

Recommended Mixer:

Series 160 Mixer

The 450RC Autovalve allows continuous ow of material while still being able to

control shut-off at the mixer. Typical uses are for heated materials or materials with

llers that need to remain suspended. Gear pump applications can also benet

because pumps can be kept running while material is shut off at the mixer.

Recirculation occurring at the valve instead of the pump eliminates pressure buildup

in the lines, preventing off-ratio dispensing. The valve also incorporates a snuff-back

feature that minimizes or eliminates the possibility of material dripping or stringing

when the valve shuts off.

Manifolds:

See Series 450 Manifold Table, previous page

Series 450XT Snuff Back Valve

7702216 450XT Autovalve

Aluminum Valve, Extended Air Cylinder with Snuff

Back and GT Seals

Order handle separately; see Autovalve Accessories

for details.

Recommended Mixer:

Series 160 Mixer

This innovative dispense valve is designed specically for two-component urethanes and

eliminates exposure of wetted shafts to air. Since 2K urethanes are moisture sensitive,

any contact with air can cure the material, locking up the dispense valve.

Manifold

Seat Plate

Valve Body

Lip Seal

O-ring

Air Cylinder Body

Manifolds:

See Series 450 Manifold Table, previous page

Specications

Valve

Size: 132l x 63.5w x 58.4h mm (3.3 x 2.5 x 2.3")

Body: 6061-T6 aluminum or 303 stainless steel

O-ring options*: Viton, PTFE Ethylene-Propylene (E-P)

Lip seal options*: Viton, Polyurethane (PU), PTFE,

Polytuff, Ethylene-Propylene (E-P)

* Repair kits containing a complete set of lip seals and

O-rings are available.

Manifold

Size: 48.3l x 63.5w x 38.1h mm (1.9 x 2.5 x 1.5")

Material: 6061-T6 aluminum or 303 stainless steel

Outlet thread size options: 7/8"-14 (for standard bell mixers)

Valve System

Weight: Aluminum valve and manifold: 2.0 lb (0.9 kg)

Stainless steel valve and manifold: 3.4 lb (1.5 kg)

Operating Parameters: Min. operating pressure: 80 psi (5.5 bar)

Max. ﬂuid pressure: 3500 psi (240 bar)

Electric handle mount switch: 24V

Specications Accessories

Weight: Aluminum valve and manifold: 1.6 lb (0.7 kg)

Stainless steel valve and manifold: 2.5 lb (1.1 kg)

Pressure Rating: 240 bar (3500 psi)

Polytuff, PTFE, Viton, and EP seals:

For varying chemical formulations and abrasive conditions

Optional Night Cap & Ratio Check Cap:

Available for 1:1 ratio manifolds

400 / 450 Autovalves Accessories

CARBON STEEL PIPE ADAPTERS

Part Part # Description

7702420 90° Elbow w/3/8" FNPS

7702425 Straight Adapter w/3/8" FNPS

TRIGGER HANDLES

If using an electric handle, a solenoid from an outside vendor is required.

Elbow adapters are available to connect material lines to the valve.

Part Part # Description

7701971 Pistol Grip Handle w/Electric Momentary Switch (24V)

7701977 Pistol Grip Handle w/Pneumatic Switch

RATIO CHECK CAP AND NIGHT CAP

Part Part # Description

7701181 PTFE Night Cap & Nut

7701184 PTFE Ratio Check Cap & Nut

REPAIR KITS

Part Part # Description

7704093 2K Kit 4X0 Repair TGT

7704095 2K Kit 4X0 Repair TPV

VALVE SEALS

EFD offers a wide variety of seal conﬁgurations for Series 400/450 autovalves.

Select both the O-ring and U-cup seals based on chemical compatibility.

O-rings Part # Material Color Description

7702275 PTFE Orange Recommended with all chemicals

U-cups Part # Material Color Description

7702280 PTFE Aqua

With PTFE O-ring /

Recommended with all chemicals

7702277 UHPME Clear

With SS spring / Epoxies (amine

catalyst), polyesters, and acrylics

7702281 PU Orange

With Viton O-ring / Epoxies

(general), polyurethanes, and

polysulﬁdes

2K Accessories

METAL JACKETS & METER MIX VALVES

Available to hold mixing nozzles onto adapters, block

manifolds, and meter mix valves. Also used when a

metal jacket is not required.

Part # Material Thread Mixer Part # Mixer

7701124 Aluminum,

Robotic

2K Standard 7/8 - 14 7700837 Series 160

7701140 Aluminum 2K Standard 7/8 - 14 7700819 Series 160

7701143 Aluminum 2K Standard 7/8 - 14 7700856 Series 160

7701163 Aluminum Alternative 7/8 - 9 7013510 Series 160

7701167 Aluminum 2K Standard 7/8 - 14 7700904 Series 160

7701165 Aluminum,

Robotic

2K Standard 7/8 - 14 7700904 Series 160

7701171 Aluminum 2K Standard 7/8 - 14 7700927 Series 160

7701170 Aluminum,

Robotic

2K Standard 7/8 - 14 7700927 Series 160

7701174 Aluminum 2K Standard 7/8 - 14 7700932 Series 160

7701203 ACS Nut /

SS Jacket

2K Standard 7/8 - 14 7701010,

7701049

Series 160

7701208 Aluminum,

Robotic

2K Standard 7/8 - 14 7701010,

7701049

Series 160

7701210 CS Nut /

SS Jacket

2K Standard 7/8 - 14 7701028 Series 160

7701396 Aluminum,

Robotic

2K Standard 7/8 - 14 7361695 Series 480

7701226 CS Nut /

SS Jacket

1-5/16 - 12 7701059 Series 162A

DISPENSING TIPS FOR MIXERS

Luer Lok adapters (locking hubs) are used for

attaching Optimum dispensing tips to Series 190 and

160 mixers. If you want to use a metal jacket with the

3.16” ID or 1/4” ID bell mixers, order the mixer and the

Luer Lok ﬁtting as two separate items unassembled:

square hub outlet and #7700943 Luer Lok ﬁtting (bag

of 50). See Optimum Dispensing Tips for details:

www.nordson.com/tips

BLOCK MANIFOLDS FOR MIXERS

Nordson EFD’s two-component manifolds separately port the resin and

hardener into the mixing nozzle. Cleanup simply involves wiping the

manifold face after the nozzle has been removed. To prevent back ﬂow

or cross contamination of reactive material, inline check valves are

available. Designed when you’re dispensing without a meter mix valve,

but directly through the mixer. For use with Series 160 and 162A.

Part # Material Inlet Outlet Solvent Ports Mixer

7701323 Aluminum (2) 1/8" FNPT 7/8 - 14 1/4" FNPT Series 160

7701325 Aluminum (2) 1/4" FNPT 7/8 - 14 1/4" FNPT Series 160

7701329 Aluminum (2) 1/2" FNPT 1-5/16 - 12 UN 1/4" FNPT Series 162A

ADAPTERS FOR MIXERS

Mixers can be connected to some pre-existing manifolds or valves using

adapters. Contact Nordson EFD for details. For use with Series 85, 100,

160, and 162A.

Part # Material Inlet

7701254 Carbon Steel 1/4" Male NPT

RETAINING NUTS FOR MIXERS & METER MIX VALVES

Available to hold mixing nozzles onto adapters, block manifolds, and

meter mix valves. Also used when a metal jacket is not required.

Part # Material Thread Mixer

7701110 Aluminum 2K Standard 7/8 - 14 Series 160 with ID 0.189-0.248"

7701113 Aluminum 2K Standard 7/8 - 14 Series 160 with ID 0.314-0.497"

7701115 Aluminum 2K Standard 7/8 - 14 Series 141 & Series 161 (all)

7701116 Aluminum Alternative 7/8 - 9 Series 161 (all)

7701108 Aluminum 1-1/16 - 12 Series 141 (all)

7026515 Carbon Steel 1-5/16 - 12 UNF Series 162A (all)

7701118 Aluminum 2K Standard 7/8 - 14 Series 141 (all)