00198353-01_AI_Location 1 Upgrade Kit_E by SIPLACE_en - 第12页

1 Introduction 1.4 Staff Qualifications and Training Assembly Instructions E by SIPLACE Location 1 Upgrade Kit 04/2017 12

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

1 Introduction

1.4 Staff Qualifications and Training

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD

foam, ESD bag or container).

Do not move the assemblies near to data view devices, monitors or television units. Keep a min-

imum distance of 10 cm to monitors.

1.3.3.4 Measurements and Modifications to ESD Modules

Do not take measurements on the modules unless the following conditions are fulfilled:

●

The measuring device is earthed (e.g. via PE conductors) or

●

You discharge the measuring head just before taking measurements with a potential-free

measuring device (e.g. by touching an unpainted metal part of the controller casing).

► Always use an earthed soldering iron if you carry out any soldering work.

1.3.3.5 Dispatching ESD Modules

► Always store modules and components in conductive packaging (e.g. metalized plastic bags

or metal sleeves) and dispatch them in conductive packaging.

► If the packaging is not conductive, place the modules in a conductive envelope before pack-

aging. Use conductive expanded rubber, ESD bags, domestic aluminium foil or paper, for ex-

ample. NEVER use plastic bags or film.

► If the module has integral batteries, ensure that the conductive packaging does not touch or

short-circuit the battery terminals and, if necessary, first cover the terminals with insulating

tape or material.

1.3.4 Release History

Document

E by SIPLACE

Location 1 Upgrade Kit

Assembly Instructions

Release Changes

04/2017 Initial release

1.4 Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up,

operation and maintenance of automatic placement systems and add-on devices and are suitably

qualified, e.g.:

●

Have been trained, instructed or authorized to switch on and off, isolate, earth and identify

electrical circuits and system components in accordance with normal safety standards.

●

Have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-

cordance with normal safety standards.

●

Have received first aid training.

1 Introduction

1.4 Staff Qualifications and Training

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

ableTableSystem)

2.1 Proparatory Steps

2 Installing the Location 1 Upgrade Kit

[03113225‑xx]

(FixedtoMovableTableSystem)

2.1 Proparatory Steps

► Remove feeders from Fixed

Table.

► Remove Tape Reel Container

[03105021-xx]. It will not be

fixed back.

► Remove the Tape Reel Con-

tainer Stopper Brackets

[03111418-xx]. They will not be

fixed back.