00198353-01_AI_Location 1 Upgrade Kit_E by SIPLACE_en - 第15页

Assembly Instructions E by SIPLACE Location 1 Upgrade Kit 04/2017 2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov- 2.2 Installing the Location 1 Upgrade Kit 15 2.2 Installing the Location 1 Upgrade Ki…

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

ableTableSystem)

2.1 Proparatory Steps

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

► Remove Waste Tape Chute

[03108361-xx]. It will be fixed

back later.

► Remove the Location 1 Fixed

Side Covers [03112971-xx].

They will not be fixed back.

► Disconnect the cable from FCU.

► Remove the screws and dowels

from the Fixed Table

[03100776-xx].

► Remove the Fixed Table

[03100776-xx].

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

2.2 Installing the Location 1 Upgrade Kit

► Remove the three covers at Location 1 shown

above:

► Exchange the Cable assembly MT60 fixed table

[03102684-xx] with the Cable harness COTi60

LOC1 [03108915-xx]. Pay attention to the orienta-

tion of the Cable harness COTi60 LOC1 [03108915-

xx].

► Use the screws ISO 4762 - M 4 x 12-A2-70

[03042553-xx] to secure the Cable harness COTi60

LOC1 [03108915-xx].

► Remove the Empty Tape Duct.

►

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

2.2 Installing the Location 1 Upgrade Kit

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

► Remove the ETD brackets

mounted on the frame.

The ETD brackets will not

be fixed back.

► Remove the location 2

cover to reveal the air ser-

vice unit.

► Plug in the tubing Tube

Insert Module LOC1

[03102152-xx] to one of

the six ports shown.

► Fix back the location 2

cover.