00198353-01_AI_Location 1 Upgrade Kit_E by SIPLACE_en - 第17页

Assembly Instructions E by SIPLACE Location 1 Upgrade Kit 04/2017 2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov- 2.2 Installing the Location 1 Upgrade Kit 17 ► Remove the three location 2 covers sho…

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

2.2 Installing the Location 1 Upgrade Kit

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

► Remove the ETD brackets

mounted on the frame.

The ETD brackets will not

be fixed back.

► Remove the location 2

cover to reveal the air ser-

vice unit.

► Plug in the tubing Tube

Insert Module LOC1

[03102152-xx] to one of

the six ports shown.

► Fix back the location 2

cover.

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

2.2 Installing the Location 1 Upgrade Kit

► Remove the three location 2

covers shown above. They

will be fixed back after rout-

ing the tube.

► Route the tubing mentioned before from

the Air Service Unit to location 1 as

shown.

2 Installing the Location 1 Upgrade Kit [03113225‑xx] (FixedtoMov-

2.2 Installing the Location 1 Upgrade Kit

Assembly Instructions E by SIPLACE

Location 1 Upgrade Kit 04/2017

► Install the adhesive cable tie mounts at the two locations shown.

► Take the two tubes 4A_BTM-TEE_L1 [03111719-xx].

► Mark one of the two tubes at both ends of the tube. This will identify it as the tube that con-

nects to the rear port of the left cylinder.

1. Hole 1

2. Hole 2

3. Hole 3

► Stretch the two tubes from left to right behind the tape cutter.

► Use cable ties to loosely secure the tubes to the cable tie bases installed before.

► Thread the two tubes [03111719-xx] through hole 1 and hole 2 and up through hole 3.