00197543-01_SM_JTF-S_ JTF-M_en - 第16页

Introduction Abbreviations 1.3.7 SIPLACE on the World Wide Web (WWW) 16 Service Manual SIPLACE JEDEC Tray Feeder

Introduction

1.3.7 SIPLACE on the World Wide Web (WWW) Staff Qualifications and Training

Service Manual SIPLACE JEDEC Tray Feeder 15

1.3.7

1.3.7 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE

homepage at http://www.siplace.com.

► You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the

SIPLACE User Group

. Here you can call up spe-

cial information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.4

1.4 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op-

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-

ance with normal safety standards.

▪ Have received first aid training.

1.5

1.5 Abbreviations

Abbreviations

Abbreviations Description

CO Component

ESD Electrostatic sensitive device

JTF-S JEDEC Tray Stack Feeder

JTF-M Multiple JEDEC Tray Feeder

SC Single conveyor with 1 lane

PCB Board

SC Station computer

TH TwinHead

WPC Wafflepack Changer

WPC4/5/6 Waffle Pack Changer version 4/5/6

ID Intermediate distributor

Introduction

Abbreviations 1.3.7 SIPLACE on the World Wide Web (WWW)

16 Service Manual SIPLACE JEDEC Tray Feeder

Service Works

2.1.1 Communication with the SIPLACE Machine Interfaces / Communications / Magazine

Service Manual SIPLACE JEDEC Tray Feeder 17

2 Service Works

Service Works

2.1

2.1 Interfaces / Communications / Magazine

Interfaces / Communications / Magazine

2.1.1

2.1.1 Communication with the SIPLACE Machine

Communication with the SIPLACE Machine

The SIPLACE JTF-S and SIPLACE JTF-M are controlled through RS232 serial communication. There

currently are two standard communication protocols available:

▪ Serial Communcation using ASCII commands

▪ ASM Communication using Hex commands

2.1.2

2.1.2 Location of Control PCB

Location of Control PCB

The control board is located behind the cover, which can be removed by releasing two screws at the

bottom.

2.1.3

2.1.3 SIPLACE JTF-S Communication [03111984-01 _ Pos1090]

SIPLACE JTF-S Communication [03111984-01 _ Pos1090]

▪ The SIPLACE JTF-S feeder is handled like a common linear feeder. Only one component type can

be set up.

▪ The control panel is completely active and necessary to run the SIPLACE JTF-S feeder.

▪ The communication protocol is HEX-Command and will be changed into ASCII by the daughter-

board.

▪ On the control board in the feeder is a label on the EPROM, which identifies the software version.

Location of Control PCB

1. The Control PCB is located behind this cover.