Specification SIPLACE CA-Series2011版 - 第38页
38 Component supply Dummy Feeder Modules Dummy feeder module for one track Danger To ensure that your SIPLACE placement machine runs safely, a feeder must be assigned to every location on the componen t trolley. If you d…
37
Component supply
Tape Feeder Modules, X-Series (CA Series)
Description
The single-track tape feeder
modules for the X-series pro-
cess paper and blister tapes
from 8 to 88 mm wide. The 8
mm X tape feeder module
feeds the smallest compo-
nents,
such as 01005 components,
for the 20 segment Collect &
Place CA head.
Component tapes with a per-
manently adhesive cover foil
(PSA foil) can be processed
with the PSA kit option.
The transport increment can
be varied over a wide range.
The foil tear-off force can be
set manually on all the feeder
modules.
The X feeder modules are
characterized by their excel-
lent
accuracy of the pickup
position, online and offline
programmability of the
feeder modules and easy
handling that allows the
feeder modules to be quickly
changed during the place-
ment
process.
The multicolor status display
signals the operating
statuses:
green for "standby", orange
for "warning" and red for "er-
ror". Information appears on
the LCD display for "orange"
and "red".
The EDIF unit (energy and
data interface) powers the
feeder module without con-
tact. Communication with the
placement machine also
takes place via this interface.
Model LxH
[mm]
Width
[mm]
Loca-
tion
Transport
increment
[mm]
Max. tape
height
[mm]
8 mm X 587x200 10,8 1 1/2/4/8 3,5
12 mm X 587x200 22,6 2
4 - 16
a
a) In 4 mm increments
6,5
16 mm X 587x200 34,4 3 4 - 20
a
25
24 mm X 587x200 34,4 3 4 - 32
a
25
32 mm X 587x200 46,2 4 4 - 40
a
25
44 mm X 587x200 58,0 5 4 - 52
a
25
56 mm X 587x200 69,8 6 4 - 64
a
25
72 mm X 587x200 81,6 7 4 - 80
a
25
88 mm X 587x200 105,2 9 4 - 96
a
25
8 mm X
12 mm X
16 mm X 24 mm X 32 mm X
44 mm X 56 mm X 72 mm X 88 mm X
All of the tape feeder modules from the X-series are available with the splice sensor already fitted.
38
Component supply
Dummy Feeder Modules
Dummy feeder module for one track
Danger
To ensure that your SIPLACE placement machine runs safely, a feeder must be assigned to
every location on the component trolley.
If you do not have enough feeder modules, then you should use dummy feeder modules as
space holders.
Dummy feeder module for the component trolley of the X series (CA series)
The dummy feeder module for the SIPLACE X series occupies one track on the component
trolley.
39
Component supply
SIPLACE Wafer System
Technical data
Electrical values
Noise emissions
Permissible environmental
impact
Supply voltage 3 x 400 VAC, 50 Hz (Europe)
3 x 208 VAC, 60 Hz (USA)
Total output 1.5 kW
Nominal current 2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuse 3 x 16 A
Nominal current consumption of largest consumer 2 A
Maximum noise emissions 74 dB (A)
Room temperature between 15 °C and 35 °C
Atmospheric humidity 30 - 75 %
(No higher than 45% on average to prevent any
possibility of condensation on the machine)