YSM10安装调整(eng) - 第5页
For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 5/107 2. Jigs and tools required for the adjustment 2.1 Jigs for the “Lightness …
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
4/107
1.
＠＠
YSM10 (10 Heads)
YSM10 (5 Heads)
YS12
YS12F
System
VGOS V40 (Windows 7)
VGOS V30 (Windows XP)
Feeder
(SS, ZS)
(ZS: Non-stop feeder replacement function is
NOT available.)
Electric feeder
Electric feeder
Front side
24-reel fixed feeder bank × 2 (No machines with
the Feeder Exchange Carriage or 60-reel fixed
feeder bank.)
Front side 24/60-reel
fixed feeder bank) &
Feeder exchange
carriage
Front side 24-reel fixed
feeder bank × 2 &
Feeder exchange
carriage
Number of heads
10
(12mm pitch)
5
(24mm pitch)
10
(12mm pitch)
5
(24mm pitch)
35μm (μ+3σ, chip)
50μm (μ+3σ, chip)
Right side (Standard)
Field of view : 8mm sq.
Right side (Standard)
Field of view : 5mm sq.
＠ ＠ ＠
＠＠＠＠＠
(XY * Z)
(*1)
[Digital 3]
12mm sq.
6.5mm thick
(*1)
[Digital 3]
8mm sq.
6.5mm thick
[Digital 5]
*( )
32mm sq.
15.0mm thick
＠ ＠ ＠ ＠ ＠ ＠
ＨＨＨ ＩＩ
460mm
360mm (With sATS)
460mm
460mm
360mm (With ATS15)
Standard
Option
Standard
specification
Ｈ Ｈ Ｈ
ＩＩ ＨＨＨ ＩＩ＠＠＠
＠ ＠ ＠
ＨＨＨ ＩＩ
＠ ＠ ＠
(XY * Z)
[Digital 5, 6]
* (Standard) 45mm
sq. (55mm sq.)
15mm
(*2)
[Digital
5, 6]
20mm sq.
6.5mm thick
[Digital 6]
*
(Option)
32mm sq.
15.0mm
ANC,
ＨＨ ＠＠ ＩＩ
sATS15, LED ,
24-reel ,
( or 60-reel
.)
Rear side 24/60-reel fixed
feeder bank & 24-reel
feeder exchange carriage
ATS15, Rear side 24
/60-reel fixed feeder
bank
. 1,270kg
: 0.45MPa or higher Set
pressure: 0.40 - 0.41MPa
. 1,250kg
Supplied air pressure: 0.45MPa or higher
Set pressure: 0.40 - 0.41MPa
: 290L/min [ANR]
(Instantaneous maximum flow when the tape
cutter is installed.)
Air consumption flow rate: 310 ℓ /min [ANR]
(Instantaneous maximum flow when the tape
cutter is installed.)
Power capacity : 7.0 kVA
(Conductor cross-section area of the supply
cable : 4.0mm
2
or more)
Power capacity : 4.9 kVA
(Conductor cross-section area of the supply
cable : 2.5mm
2
or more)
Table 1
*1: Ｈ Ｈ Ｈ : [Size]: 0402
to 3216 [Thickness]: 1.2mm or less)
*2:
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
5/107
2. Jigs and tools required for the adjustment
2.1 Jigs for the “Lightness” adjustment of the cameras
For the Fiducial & Multi cameras (Use any of the following.)
Item
Part Name
Part No.
Qty
Light adjuster
(For the “Lightness”
adjustment of the
Fiducial camera and
the Multi camera)
LIGHT ADJ. 3 ASSY
LIGHT ADJ. 3 ASSY.
KHW-M8806-Cx
KMC-M8806-C0
1
35mm sq.
Light gray & White
LIGHT ADJ. 1 ASSY
LIGHT ADJ. 1 ASSY.
KHW-M8806-Ax
KMC-M8806-A0
1
35mm sq.
Dark and light gray & white, with
one chamfered corner
LIGHT ADJ. S ASSY
LIGHT ADJ. S ASSY.
KHW-M8806-Bx
KMC-M8806-B0
1
17mm sq.
Light gray & white,
with one chamfered
corner
LIGHT ADJUSTER S
KGT-M8806-0x
1
17mm sq.
Light gray & white
LIGHT ADJUSTER
KM1-M8806-00
1
35mm sq.
Dark and light gray & white
LIGHT ADJUSTER 1
KM1-M8806-10
1
35mm sq.
Dark and light gray & white, with a
3 hole
KM1-M8806-11
1
Table 2
* It is recommended to use a 17mm sq. light adjuster for the “Lightness” adjustment of the Multi
camera.
For the multi camera (Elevator type “Side” light)
Item
Part Name
Part No.
Qty
32mm sq.
Milky white light adjuster
LIGHT ADJ.4 ASSY
KHW-M8807-00
1
With silver
film
Table 3
For the Scan camera
Item
Part Name
Part No.
Qty
＠
ﾓ
LIGHT ADJ. 4 ASSY
KHW-M8806-D0
1
11mm sq.
Light gray &
White
LIGHT ADJ. 4 ASSY.
KMC-M8806-D0
Table 4
2.2 board and components required for the ACP-Chip
adjustmentACP
Table 5
Item
Part Name
Part No.
Qty
ACP
PCB
ASSY.4
KM0-M8810-40
1
(Select
either of
the two)
Double-faced tape:
20mm width
AMF
PCB
ASSY.1
KM0-M8810-10
Double-faced tape:
35mm width
1005 ｣ｨｩｰ
REEL CERAMIC
1005
KGA-M880C-10
1
()
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
6/107
2.3 Station and components required for the “ACP-Station” adjustment :
If the machine is equipped with an optional Multi camera, perform the “ACP-Station” adjustment.
ＵＵ ｐｐＭＭＭ ＠＠ＨＨＨ ＵＵ ＩＩ
ＨＨ ｐｐＩＩＩ ＷＷ ＠＠ＨＨＨ ＩＩ ＨＨ ｐｐＩＩＩ ｐｐＭＭＭ
Table 6
2.4 Jigs and tools required for installing a machine
Table 7
Item
Part Name
Part No.
Qty
FAMF Station
(Plate Size: 240x170)
FAMF STATION ASSY.
KGA-M88F0-A0
１
(Select
either of
the two)
Mini FAMF Station
(Plate Size: 100x100)
FAMF STATION
S.ASSY.
KGA-M88F0-B0
68-pin QFP
QFP 68P
KW8-M880A-10
1
208-pin QFP
(With a sticker)
QFP 2S
KM0-M880A-20
1
Item
Part Name
Part No.
Qty
PLAT LEVEL,
0.1mm/m
KV7-M3823-00
1 or 2
55mm spanner
SPANNER 55
KLW-M8801-00
2
Jig for aligning a
production line
JIG 1
S01F-M54B1-11
2
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/