YSM10安装调整(eng) - 第11页
For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 11/107 Work procedure 1. Figure 4 2. 3. Figure 5 4. Figure 6 5 该文档 是 极速PDF 编辑器…
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
10/107
3.3 When the monitor interferes with the adjoining machine
YSM10
Figure 3
＠ ＠ ＠
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
11/107
Work procedure
1.
Figure 4
2.
3.
Figure 5
4.
Figure 6
5
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
12/107
3.4 Connect to the power source and air supply
Caution:
Connections of the power and air supply
Figure 7
Specifications of the power and air supplies
Item
Specifications
0.45MPa (4.5Kgf/cm
2
)
Set pressure:
0.40 ~ 0.41MPa
＠＠＠＠＠＠＠＠＠＠＠＠＠＠＠＠＠
&
Three-phase AC 200/208/220/240/380/400/416V
+/-10% 50/60Hz
Power capacity
1.0kW
Conductor cross-section area: 4 mm
2
or more
Table 10
to 0.40 ~ 0.41Mpa
.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/