YSM10安装调整(eng) - 第19页
For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 19/107 4.6 “ Orthogonal ization Level ” adjust ment �…
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
18/107
4.5.2 “Dual Drive Offset” adjustment for the Y-axis
Y
:
1.
Fill in the current “Dual Offset” value on the checksheet.
Figure 17
2.
[Originize] .
(“Result” value).
3. Check and save the dual drive offset value.
Y2-axis (Pulse) “”
Fill in the measured value on the checksheet.
Adjustment item
Specified value (%)
Dual Drive Offset
16,128,000 - 16,640,000
Table 12
Caution:
＠Ｈ
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
19/107
4.6 “Orthogonalization Level” adjustment
ｘｙ
ﾓﾔ
:
Ｚ＠
Jig required for the “Orthogonalization Level “adjustment
*
.
Board
Part Name
Part No.
Qty
ACP
PCB ASSY.4
KM0-M8810-40
1
.
AMF
PCB ASSY.1
KM0-M8810-10
Table 13
1. .
ﾓｕｮｩｴﾔ
Caution:
Ｉ
2. [034 Orthogonalization level] on the CalibSm main menu
to display the following window.
Figure 18
Step 3
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
20/107
3. Check the reference coordinate of the mark.
(
0.5mm)
ﾓｓｴ､
Figure 19
ｭ｡ｲｫ
“No.1 ｧｬ｡ｳｳ_0.5_Circle” “MCH_SETUP”
“Mark Adj” .
4. .
Figure 20
5. ＠
:
<> <>
Figure 21
Item
Specification
0.0015 deg
Table 14
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/