YSM10安装调整(eng) - 第33页

For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 33/107 7. Item Specified value Camera Pos. X, Y Variation between “ Current” and “M…

100%1 / 107
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
32/107
4.12 Multi camera – “Camera Pos.” adjustment (Option)
:
＠ｮｯｺｺｬ･ Ｈ󳬹󳴵
1. [011 Multi Camera] CalibSm
Figure 37
2. “Camera Pos.” “Adjust Item”.
“Rec. ｮｯｺｺｬ･” “󳬹󳴵 302 (313)”
3. .
“5-Digital MultiC”.
4.
[Move to Set Pos.] 󳬹󳴵. ( 󳬹󳴵 .)
5. [Rec.Test] .
:
6. [Execute] .
Ｑ
Figure 38
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
33/107
7.
Item
Specified value
Camera Pos. X, Y
Variation between “Current” and “Measure” values should fall within 0.01mm
Table 20
8. Change the setting of the camera to be adjusted to “6-Digital
MultiC”.
Figure 39
9.
[Rec. Test] .
10.
[Execute] .
󳬹󳴵
MutiMACS “6-Digital MultiC” “Camera Pos. X, Y” and “Macs 1, 2”
.
Figure 40
8.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
34/107
4.13 “Head Offset XY” adjustment ﾓ
:
󳴵 Ｈ󳬹󳴵
Flow of the “Head Offset” adjustment for each camera
< 1: >
<
2: >
1. [015 Head Offset] CalibSm
Figure 41
2. “Head Offset XY” “Adjust Item”.
“Rec. 󳬹󳴵” and “󳬹󳴵 302 (313)” .
3.
< 1: >.
“3-Scan Main”.
4.
.
10-head
:
5-head :
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/