YSM10安装调整(eng) - 第34页
For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 34/107 4.13 “Head Offse t XY” adjustment ﾓ : Ｈ Flow of the “Head Offset” a…
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
33/107
7.
Item
Specified value
Camera Pos. X, Y
Variation between “Current” and “Measure” values should fall within 0.01mm
Table 20
8. Change the setting of the camera to be adjusted to “6-Digital
MultiC”.
Figure 39
9.
[Rec. Test] .
10.
[Execute] .
MutiMACS “6-Digital MultiC” “Camera Pos. X, Y” and “Macs 1, 2”
.
Figure 40
8.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
34/107
4.13 “Head Offset XY” adjustment ﾓ
:
Ｈ
Flow of the “Head Offset” adjustment for each camera
< 1: >
<
2: >
1. [015 Head Offset] CalibSm
Figure 41
2. “Head Offset XY” “Adjust Item”.
“Rec. ” and “ 302 (313)” .
3.
< 1: >.
“3-Scan Main”.
4.
.
10-head
:
5-head :
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
35/107
5. [Move to Set Pos.] . ( .)
, Type 302 (313) to Head 1.
6.
[Rec.Test] .
Ｈ
:
7.
[Execute]
Ｑ
Figure 42
8.
:
・
?
・
?
・
?
Figure 43
Item
Specified value
Head Offset X
0.18mm or less with respect to 12.00 (24.0) pitch
Head Offset Y
0.06mm or less
Table 21
Ｑ＠
,
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/