YSi-V_Ope_E - 第31页
xxviii Safety instructions 3.4 Label positions T he following warning/caution labels are attached to the Y AMAHA products to ensure safe and correct use. Check that the information on eac h label is clearly legible and c…
xxvii
Safety instructions
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the top cover of the feeder exchange carriage (for
YSM40 and Z:LEX (YSM20
))
.
Applicable
machines
Feeder exchange carriage
(YSM40/YSM40R, Z:LEX(YSM20/YSM20W))
Case
Setup
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the top cover of the feeder exchange carriage (for YSM40
and Z:LEX (YSM20)).
Applicable
machines
Feeder exchange carriage
(YSM40/YSM40R, Z:LEX(YSM20/YSM20W))
Case
Setup
Potential
hazard
Machine damage
To avoid
hazard
Do not insert or remove any connector while power is on.
Applicable
machines
cATS10 (Z:LEX(YSM20/YSM20W) )
Case
Setup
xxviii
Safety instructions
3.4 Label positions
The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
For safety precautions other than those on the labels shown in this section, see the instructions in "1. Safety".
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
n
NOTE
When connecting power to this equipment, refer to "Power connection terminals" described in the appendix.
Warning/caution labels
Front side
■ Open/close cover inner side
■ Lower panels
■ Panels inner side
■ Top of controller
■ Servo controller
■ Left of main switch
■ Conveyor opening
(right and left sides)
■ Open/close cover
■ Main switch
■ Panels inner side
■ UPS unit inside rear cover
93201-M9-00
xxix
Safety instructions
Warning/caution labels
Rear side
■ Rear panels
■ CZ-axis motor
(Option)
■ OPT-CL board
■ Behind rear door
■ XY-axis ball screw cover
Capacitor for R/CZ-axis (Option)
■ Laser unit (Option)
93202-M9-00