YSi-V_Ope_E - 第35页

9. How to replace consumable parts 4-27 9.1 Cleaning and replacing the conveyor belts 4-27 9.2 Replacing the UPS (uninterruptible power supply) battery 4-29 Chapter 5 Lubrication points 1. Applicable grease and grease gu…

Chapter 4 Maintenance

Before beginning work 4-1

1. Maintaining YSi-V performance 4-2

1.1 Essential conditions and working environment 4-2

1.2 Importance of periodic inspections and cleaning 4-3

1.3 Importance of appropriate humidity management 4-3

2. Maintenance list 4-4

3. Preparing for maintenance tasks 4-6

3.1 Consumable parts 4-6

3.2 Maintenance tools 4-7

3.2.1 Cleaning tools 4-7

3.2.2 Lubricating tools and grease 4-8

3.3 Required tools 4-9

4. Weekly inspection 4-10

4.1 Checking the board sensor condition 4-10

4.2 Checking the board clamp condition 4-10

5. Monthly 4-11

5.1 Inspecting each axis 4-11

5.2 Cleaning and greasing the ball screws and linear guides 4-12

5.2.1 Cleaning and greasing the X axis ball screws 4-12

5.2.2 Cleaning and lubricating the X axis guides 4-13

5.2.3 Cleaning and greasing the Y axis ball screws 4-14

5.2.4 Cleaning and greasing the Y axes guides 4-16

5.3 Cleaning the camera lighting unit 4-17

6. Three-month inspection 4-18

6.1 Air intake fan filter 4-18

6.2 Cleaning and greasing the CZ axis (option) ball screws 4-19

7. Six-month inspection 4-20

7.1 Cleaning and greasing the marking unit (option) cam 4-20

7.2 Cleaning controller filter (For Type HS2 only) 4-21

8. One-year inspection 4-22

8.1 W axis 4-22

8.1.1 Cleaning and greasing the W axis ball screws 4-22

8.1.2 Cleaning and greasing the W axes guides 4-23

8.1.3 Cleaning and greasing the hexagon spline 4-24

8.2 Inspecting and cleaning the air/mist filters 4-25

9. How to replace consumable parts 4-27

9.1 Cleaning and replacing the conveyor belts 4-27

9.2 Replacing the UPS (uninterruptible power supply) battery 4-29

Chapter 5 Lubrication points

1. Applicable grease and grease gun 5-1

1.1 Applicable grease 5-1

1.2 Grease gun 5-1

2. Lubrication of each unit 5-2

2.1 Each axis unit 5-2

2.1.1 X and CZ axis guide and ball screw 5-2

2.1.2 Y axis guide and ball screw 5-3

2.1.3 W axis guide and ball screw 5-4

Appendix

1. Power connection terminals A-1

2. Connection between machines A-2

3. UPS (Uninterruptible Power Supply) A-3

3.1 Safety precaution A-3

3.1.1 Precautions when shipping or exporting the UPS A-3

3.1.2 Disposing of used battery after replacement A-3

3.1.3 Safety precautions A-3

3.2 About the UPS A-5

3.3 Operation and setting A-6

3.3.1 Front panel A-6

3.3.2 Operation during normal operation (power is normal) A-6

3.3.3 Operation during power failure or trouble A-6

3.4 Maintenance A-7

3.4.1 Battery replacement period A-7

3.4.2 Battery replacement A-7

3.4.3 Replacement battery storage A-7

3.5 Troubleshooting A-8

Index

The instruction manual of this machine is written for those who operate

this machine.

Please read this manual carefully for correct operations and pay

special attention to safety precautions.

After reading through this manual, please use this manual as an

occasional reference and keep it within reach.

Before using the YSi-V

Contents

1. Using this manual i

1.1 Available manuals i

1.2 Manual contents i

2. Contents of each chapter ii

3. Page layout iii