YSi-V_Ope_E - 第94页
Chapter 5 Lubrication points Contents 1. Applicable grease and grease gun 5-1 1.1 Applicable grease 5-1 1.2 Grease gun 5-1 2. Lubrication of each unit 5-2 2.1 Each axis unit 5-2 2.1.1 X and CZ axis guide and ball screw 5…
4-29
4
Maintenance
9.2 Replacing the UPS (uninterruptible power supply) battery
The UPS battery used in this equipment will wear down, reaching the end of its service life. The battery service
life and replacement interval differ depending on the usage environment (ambient temperature, etc.).
For detailed information on how to replace the UPS battery, see the user's manual that comes with the UPS.
n
NOTE
When you have replaced the UPS battery, write the replacement date on the label affixed to the UPS unit and the left
side of the main switch.
5-1
5
Lubrication points
1. Applicable grease and grease gun
1.1 Applicable grease
When greasing the lubrication points, be sure to use appropriate grease specified by YAMAHA as listed below.
c
CAUTION
If grease other than that specified is used, this may cause damage to the YSi-V.
n
List of specified greas
Lubrication
point
Guide Ball screw Remarks
X-axis NSL grease NSL grease
Y-axis NSL grease NSL grease
CZ-axis - NSL grease Option
W-axis NSL grease NSL grease
1.2 Grease gun
Select an appropriate nozzle suitable for the lubrication point from three kinds of nozzles shown below and
attach it to the grease gun to apply the grease. Change the nozzle according to the greasing instructions.
Grease gun
Grease gun
30°-bent type nozzle
Standard nozzle
Change the
nozzle here.
Chuck flexible type nozzle
30°
Outside diameter
of tip: φ14
Outside diameter
of tip: φ10
Outside diameter
of tip: φ5
53501-M9-00
c
CAUTION
Prepare different nozzles by grease. If two or more kinds of grease with different characteristics are mixed in the nozzle
and it is applied, this may cause the YSi-V performance to lower.