YSi-V_Ope_E - 第99页

Contents 1. Power connection terminals A-1 2. Connection between machines A-2 3. UPS (Uninterruptible Power Supply) A-3 3.1 Safety precaution A-3 3.1.1 Precautions when shipping or exporting the UPS A-3 3.1.2 Disposing o…

100%1 / 110
5-4
5
Lubrication points
2.1.3 W axis guide and ball screw
Lubrication points for W axis
W axis ball screw
W axis guide
Grease nipple
W axis ball screw
Hexagon spline
Grease gun:
Apply by hand:
53505-M9-00
Unit to be lubricated Lubrication point Interval Lubrication method
Guide 2
Once a year
Grease gun: Bend type nozzle
Ball screw 2 Apply grease by hand
Hexagon spline 1 Apply grease by hand
Contents
1. Power connection terminals A-1
2. Connection between machines A-2
3. UPS (Uninterruptible Power Supply) A-3
3.1 Safety precaution A-3
3.1.1 Precautions when shipping or exporting the UPS A-3
3.1.2 Disposing of used battery after replacement A-3
3.1.3 Safety precautions A-3
3.2 About the UPS A-5
3.3 Operation and setting A-6
3.3.1 Front panel A-6
3.3.2 Operation during normal operation (power is normal) A-6
3.3.3 Operation during power failure or trouble A-6
3.4 Maintenance A-7
3.4.1 Battery replacement period A-7
3.4.2 Battery replacement A-7
3.4.3 Replacement battery storage A-7
3.5 Troubleshooting A-8
Appendix
A-1
Appendix
1. Power connection terminals
n
Power supply specifications
Model No. YSi-V
Power 3-phase AC 200/208/220/240/380/400/416V (±10%)
Frequency 50/60Hz
Power capacity 7.0 kVA
n
Power input terminal
The power connection terminals are located behind the lower right panel on the front of the machine. Connect the power
cable leads as shown below to the L1, L2, L3, and earth (PE) on the power terminal block.
Main breaker
Power input terminal
YSi-V
Power input terminal (L1, L2, L3),
Earth terminal (PE)
Clamped at these
two positions
23500-M9-00
n
Power cable example
Power cable example
Fork tongue terminal
Ring tongue terminal
L1
L2
L3
PE
L=350mm
23501-M9-00
c
CAUTION
Use a power cable whose conductor cross-section area is greater than 3.3mm
2
(AWG12).
w
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, MAKE SURE THAT THE POWER SOURCE IS OFF BEFORE CONNECTING THE
POWER CABLE. ALSO MAKE SURE THAT THE GROUND CABLE IS SECURELY CONNECTED TO THE MACHINE.