00192377-02 - 第75页

SIPLACE S-23 HM 2 Retrofitting Instruct. S-23 HM to SW V 502.xx incl. RV6-DLM 1 Head (Option) 07/01 Issue 2.5 Required Retrofitting Kits, incl. S oftware 75 2.5.5 Part s Needed in Case of an Exi sting 14" Moni tor -…

100%1 / 126
2 Retrofitting Instruct. S-23 HM to SW V 502.xx incl. RV6-DLM1 Head (Option) SIPLACE S-23 HM
2.5 Required Retrofitting Kits, incl. Software 07/01 Issue
74
2.5 Required Retrofitting Kits, incl. Software
2.5.1 Conversion Kit "URS S23HM to SW502 incl. Head Modular", Item no.
00356654-01
- 1 Conveyor control TSP-210 Item no. 00349979-01
- 3 Input/output board, mixed)
KSP-P219-A32 Item no. 00349189-01
- 1 Backplane KSP-P219 Item no. 00349190-01
- 1 Cable interrupt TSP-210 Item no. 00354719-01
- Hardware (screws)
- 1 Retrofitting instructions, SIPLACE S23 HM
to SW V 502.xx D+E Item no. 00192377-02
- 1 CD software SIPLACE station 502/1
(502.01) Item no. 00358514-01
- 2 Nozzle reject (bar) SP12 (S20) Item no. 00323049-02
(= Bar with fiducials for nozzle changer RV12 Standard)
2.5.2 Retrofit kit for compressed air disconnector S25HM, Item no. 00356993-01
- 1 Relay connector
3TX7 24VDC 1 changeover contact Item no. 00349535-01
- 1 Single strand W1, W2, W3
0.50 BUBK X05V-K flexible lead PVC Item no. 00822109-01 L= 1.800 m
- Connector sleeve 0.5 mm2 orange Item no. 00805323-01 contains 6 units
- 1 Retrofitting instructions for wiring * Item no. 00256997-01 (see: Fig. 2.8.8)
2.5.3 Set of Labels for Feeder Locations and Gantries, Item no. 00353125-01
– Not mandatory, but does enhance the overview dramatically, particularly when an MTC is in-
stalled.
2.5.4 Overview Label on the Double Wing doors on the Machine Frame
– Machine Label Servo Unit S23/S25HM: Item no. 00349181-01
New servo boards with 2 potentiometers (previously 3)
(The labels must be brought up to date but not necessarily by means of upgrading.)
– Machine Label Control Unit S-25 HM:
Item no. 00356629-01
TSP 210: Additional backplane + TSP 210 + 3 x KSP219.
SIPLACE S-23 HM 2 Retrofitting Instruct. S-23 HM to SW V 502.xx incl. RV6-DLM1 Head (Option)
07/01 Issue 2.5 Required Retrofitting Kits, incl. Software
75
2.5.5 Parts Needed in Case of an Existing 14" Monitor
-
15" monitor e156; touch screen Item no. 00357534S01
- Adapter e156 (incl. fasteners) Item no. 00357744S01
2.5.6 "6 C&P-head R-Configuration kit" (Option), Item no. 00117261-01
- Placement head assembly (RV 6-DLM1) Item no. 00354246-01 *)
- 3 Socket hex head cap screws M4 x 16
(to fasten the placement head)
- Head cover Item no. 00329003-01
(re-use the screws previously removed)
- 12 Nozzles Item no. 00326123-02
- 12 Nozzles Item no. 00326124-02
- 1 enclosed package/DLM1_S23 Item no. 00345365-03
– 1 Adapter plate, enclosed package S23 Item no. 00354836-01
– 1 Extension hose, vacuum, holding circuit_S23 Item no.00350975-01
– 1 Extension hose, vacuum, placement circuit_S23 Item no.00351031-01
– 1 Extension hose, interrogation, placement circuit_S23 Item no.00351032-01
– 4 Rubber-metal vibration buffers 15x30,
55 Shore D=15/H=30 Item no. 00345010-01
– 2 Velcro-type fastener Item no. 00346483-01
– 4 Cap screw M4x6 DIN6912 Item no. 00095105-01
– 4 Schnorr washer 4.3 V2a HN 160 Item no. 00342876-01
– 1 Conversion instructions DLM1 Collect & Place Head S23/F5 G+E 00191684-03
*) The 2 wide ribbon cables and the ribbon cable to the illumination board of the RV12-DLM1
head that were de-installed are to be re-used for the RV6-DLM1 head.
2.5.7 Spare Parts (not in the Kit but Required for 6-Segment Head, in Case of an
Defect)
- x- y- star axis board KSP-A362Item no. 00345516-02 *)
- z-dp- axis board KSP-A9362Item no. 00335519-04 *)
*) Required only in the event of an error in case one of the boards stops working during the
BIOS download.
2 Retrofitting Instruct. S-23 HM to SW V 502.xx incl. RV6-DLM1 Head (Option) SIPLACE S-23 HM
2.6 Required Tools, Auxiliary Test Equipment, etc. 07/01 Issue
76
2.5.8 Nozzle Changer for 6-segment revolver head (option)
– Nozzle Changer for 6-segment revolver head (option), Item no. 00116162-01
2.5.9 Software LR UNIX, V 502.01
NOTE:
The line computer software V 502.01 is always required for this upgrade -> Item no.: see below.
Use the Software Version Description LRU V 502.01 for the installation. It also contains the re-
quirements for the UNIX line computer. 2
– Software LR UNIX V502.01: Booting and installation disk and CD, Item no. 00358516-01.
2.6 Required Tools, Auxiliary Test Equipment, etc.
– Set of Allen-type wrenches
– Cross-slotted screwdriver, size 1
– Screwdriver with internal serrations T8
– Oblique-nosed cutting pliers (for removing cable ties while de-installing nozzle changer RV12)
– Clean cloth and ethyl alcohol
– CAN terminal with ribbon cable
– Precision calibration case
– Components for precision calibration
– Mapping plates for PCB and revolver mapping
- 4 Cable ties (W = 2.4 mm, L = 92 mm) 00805140-01 per nozzle changer
- 2 Mounting pedestals for cable ties,
adhesive 00318666-01 per nozzle changer
- 1 (if necessary) adhesive label (with text) 00332920-03 German and English
- 1 (if necessary) adhesive label (with text) at request EU languages
- 1 (if necessary) adhesive label:
triangular warning
symbol, "Hand injury" 00335957-01