fx3r.pdf - 第21页
FX-3R Maintenance Guide 2-3 SL6041492TN × 4 pcs. Head cable guide Head main stay Upper side: SL6040892TN × 5 pcs. Lower side: SL6040892TN × 4 pcs. Wind direction Head fan Fan guard SL4042591SC × 4 pcs. SL6041092TN × 2 pc…
FX-3R Maintenance Guide
2-2
Rev. 1.00
17) Assemble the head main stay. First, push the head main stay against the bottom of the
head main base and assemble them. After that, adjust the height levels of the stay
stands L･R and Z-power connector base, and then assemble them.
The Fig. below shows the LF head. Replace other head in the same manner as
described above.
∗ Apply Loctite 242 to the head assembly screws (6 pcs.) and assemble them with a
tightening torque of 7.0N･m.
∗ After the head has been replaced, MS parameters need to be input again. For details
about input items, see section 2-7.
FX-3R Maintenance Guide
2-3
SL6041492TN
×
4 pcs.
Head cable guide
Head main stay
Upper side: SL6040892TN × 5 pcs.
Lower side: SL6040892TN × 4 pcs.
Wind
direction
Head fan
Fan guard
SL4042591SC × 4 pcs.
SL6041092TN
×
2 pcs.
Stay stand R
(Opposite side: L)
SL6040892TN × 2 pcs.
Head core base
Rev. 1.00
FX-3R Maintenance Guide
2-4
ZT-driver board
ZT-driver support
Right side (Same as the left side)
SL6041492TN
×
6 pcs. (one side)
Z-power connector base
SL6040892TN × 4 pcs.
Z-motor power cable
Rev. 1.00