fx3r.pdf - 第223页

FX-3R Maintenance Guide 13-54 (4) EN rear LEFT FEEDER RIGHT FEEDER ONLINE START SERVO FREE CONSOLE CHANGE ORIGIN STOP CYCLE EMERGENCY SW11 SW14 SW15 SW16 SW17 SW12 SW13 [Option] Figure 13-9-3-4 Operation Switches (EN Rea…

100%1 / 251
FX-3R Maintenance Guide
13-53
(3) EN front
LEFT FEEDER
RIGHT FEEDER ONLINE
START SERVO FREE
CONSOLE CHANGE
ORIGIN
STOP
CYCLE
EMERGENCY
SW1
SW2
SW3 SW6 SW7
SW8
SW10
SW4 SW5 SW9
[Option]
MAINTENANCE KEY
Figure 13-9-3-3 Operation Switches (EN Front)
Table 13-9-3-3 List of Operation Switch Replacement Parts (EN Front)
No.
Switch name Element Actuator LED Bezel Lens Remarks
SW1
ONLINE HA005340010 HA005340020 HA005340070 HA00534004A HA00552001B
Bezel is provided with a
cover.
SW2
ORIGIN HA005340010 HA005340020 HA00534007A HA005520030 HA00552001A
SW3
START HA005340010 HA005340020 - HA005520030 HA00552001B
HA005520010
SW4
STOP HA005340010 HA005340020
HA005340070 HA005520030
- HA005520030
SW5
CYCLE HA005340010 HA005340020
“HX00326000A” is assembled.
HA00552001B
SW7
RIGHT
FEEDER
SW6
LEFT
FEEDER
“HX00326000A” is assembled.
SW8
CONSOLE
CHENGE
40048036 HA005530010 HA00553002A
OPTION
(REAR MONITOR)
If the rear motor OP is not
provided, “HX00326000A” is
mounted.
SW9
MAINTENANCE
KEY
HA005340010 HA005350020 -
HA005520020
HA00535003A
-
SW10
EMERGENCY 40092905
Rev. 1.00
FX-3R Maintenance Guide
13-54
(4) EN rear
LEFT FEEDER
RIGHT FEEDER ONLINE
START SERVO FREE
CONSOLE CHANGE
ORIGIN
STOP
CYCLE
EMERGENCY
SW11 SW14 SW15
SW16
SW17
SW12 SW13
[Option]
Figure 13-9-3-4 Operation Switches (EN Rear)
Table 13-9-3-4 List of Operation Switch Replacement Parts (EN Rear)
HA00553002A
OPTION
(REAR MONITOR)
If the rear motor OP is not
provided, “HX00326000A” is
mounted.
SW17
EMERGENCY 4008956
SW16
CONSOLE
CHENGE
40048036 HA005530010
“HX00326000A” is assembled.
SW15
RIGHT
FEEDER
SW14
LEFT
FEEDER
“HX00326000A” is assembled.
HA00552001B
SW13
CYCLE HA005340010 HA005340020 HA005340070 HA005520030
HA005520030 HA00552001B
SW12
STOP HA005340010 HA005340020 - HA005520030 HA005520010
START HA005340010 HA005340020 -
No.
Switch name Element Actuator LED Bezel Lens Remarks
SW11
Rev. 1.00
FX-3R Maintenance Guide
13-55
2) Mounting switches
Lenses
Green, red, yellow
Switch actuator
Bezel
With/without cover
+24V LEDs
Green, orange
Projection shall
face leftward.
<Procedure>
(1) ONLINE, ORIGIN, START, STOP, SERVOFREE, CYCLE switches
Parts used
Lens for flat (HA005520010, HA00552001A, HA00552001B)
LED (HA005340070, HA00534007A)
Bezel (HA005520030, HA00534004A)
Switch actuator (HA005340020)
<Procedure>
c Fit the bezel (black) into the cover panel.
The bezel has a projection to stop rotation.
Attach the bezel so that
the projection faces to the left when viewed from the front.
d Insert the LED into the switch actuator, and fit the actuator over the projection of the bezel
carefully. There is a nut to be used to fix the bezel, so remove it.
e Insert the bezel (silver) from the back of the panel and secure it with the fixing nut.
f Finally, fit the lens for flat into the switch actuator firmly.
References are shown on the following page.
Rev. 1.00