fx3r.pdf - 第241页
FX-3R Maintenance Guide 15-7 Rev. 1.00 Figure 15-2-5 Adjustment of Upper Discharge Guide Push all the way. Bank down No interf erence 2 ± 0.5mm Bank up ETF
FX-3R Maintenance Guide
15-6
Rev. 1.00
Figure 15-2-4 Detachment of Cutter Main Unit
Cutter main unit
SL6062092TN
Hexagon socket head
cap bolt with washer
M6 L = 20
40084697
Spacer A
40084698
Spacer B
FX-3R Maintenance Guide
15-7
Rev. 1.00
Figure 15-2-5 Adjustment of Upper Discharge Guide
Push all the way.
Bank down
No interference
2 ± 0.5mm
Bank up
ETF
FX-3R Maintenance Guide
15-8
Rev. 1.00
15-2-1. Assembling and Adjusting the Lower Discharge Guide
1) Assemble the bottom cover angle to the bottom of the cutter base and adjust the clearance in
the Z-direction between the bottom discharge guide and the bottom of the cutter base to 0.1 to
0.5 mm. Additionally, check that the bottom cover angle does not interfere with the cover FB_A.
∗ If the adjustment allowance is insufficient, loosen the assembly screws of the cover
FB_A and cover FB_B to make the adjustment.
Figure 15-2-6 Adjustment of Lower Discharge Guide
40095334 Bottom cover angle
40095335 Bottom discharge cover A
40095333 Bottom discharge guide
SM3040652TN Round screw M4, L = 6
No interference
Cover FB_A
(Bottom cover of
main unit)
0.1～0.5m
m
Bottom of cutter base
0.1 to 0.5mm