fx3r.pdf - 第99页
FX-3R Maintenance Guide 8-17 8-3-5. Replacing the Conne ctor for Off-line Setup 1) Disconnect the connector for the off-line setup from the E trolley cover R. 2) Disconnect the connector connecting the cable o f the conn…
FX-3R Maintenance Guide
8-16
8-3-4. Replacing the Connector Cable
1) Remove the connector mounting screws to detach the connector from the FDC bracket.
2) Detach the front panel. (See Figure 8-3-3.)
3) Disconnect the connectors from the electric bank PCB and replace the cables.
4) Reassemble the components in the reverse order of disassembly.
40084636
FDC bracket
40084826 - EF IF CBL 1-5 ASM
40084827 - EF IF CBL 6-10 ASM
40084828 - EF IF CBL 11-15 ASM
40084829 - EF IF CBL 16-20 ASM
40084830 - EF IF CBL 21-25 ASM
40084831 - EF IF CBL 26-30 ASM
HK079190000
Connector screw
Figure 8-3-4-1 Replacement of Connector Cable
Rev. 1.00
FX-3R Maintenance Guide
8-17
8-3-5. Replacing the Connector for Off-line Setup
1) Disconnect the connector for the off-line setup from the E trolley cover R.
2) Disconnect the connector connecting the cable of the connector for the off-line setup and the
relay cable to the electric bank PCB. After that, replace the connector for the off-line setup.
3) Reassemble the components in the reverse order of disassembly.
Rev. 1.00
40084841
EF setup cable 1 bracket
assembly
40084837
EF setup cable 2
assembly
40084841
EF setup cable 1 bracket
assembly
Connected at fixing base
40084666
E trolley cover R
Figure 8-3-5-1 Replacement of Connector for Off-line Setup
FX-3R Maintenance Guide
8-18
8-3-6. Replacing the ETF Incorrect Insertion Detection Sensor
1) In the FX-3R, the sensors are arranged as shown in the Figure below.
To remove the sensor together with the bracket, the sensor height needs to be adjusted.
To replace only the sensor, start the work from step 4).
マウンタ上面図
LF
RF
RRLR
REAR
FRONT
LEFT
RIGHT
受投
受投
受 投
受 投
Rec.
Rec.
Rec.
Rec.
Emit Emit
Emit Emit
Top view of mounter
Figure 8-3-6-1 ETF Incorrect Insertion Detection Sensor Layout Drawing
2) Replace the sensor of the bracket assembly you have removed.
Rev. 1.00