VI User Manual - 第104页

.TST file creation 4 - 30 Vision 2007 4.10 User Manual Re v 01 3. Select the jedecs by checking the left column . 4. Copy or delete jedecs if nece ssary by clicking on the je- dec codification with the righ t button of t…

.TST file creation

Vision 2007 4.10 User Manual Rev 01 4 - 29

4.8.4 TST file edition

During tst file opening some checks are done in order to find out the jedecs contained in the

zones.dsc file and present in the tst file.

4.8.4.1 Zones layers

After the tst file opening, click on

Dysplay zones

button in order to display the zones already

associated with the tst file, if the operator unselect the menu, the zones will be no more dislayed.

This selection will also display the zones layers win-

dow.

The standard zones and centered zones are re-

grouped into one layer, same for Multi-zones.

Joker zones are dispatched into several layers fol-

lowing their light levels settings.

By clicking on the icon Eye the user can hide or dis-

play the zones linked to the layer (in order to show

only theses zones).

4.8.4.2 Automatic zones creation

After the tst file opening, in Edit menu, go to Board sub menu to create automatically,

re-create or delete the different zones. The menus allowing zones creation are:

4.8.4.3 Automatic centered zones creation

The menu Create zones allows the creation and the management of zones.dsc file con-

cerning the jedecs associated to centered zones.

1. Select Create zones in the pulldown menu. A warning

message will appear expecting a confirmation or not of

the zones creation.

2. Click on OK button. A list of jedecs already defined for

centered zone appears.

If there are some jedecs cor-

responding, an information

message will appear. This

message will appear each

time the user will modify the

zones.dsc file.

The user can check the box in order to avoid the message, he must save the tst file to

keep this modification.

Menu Description

Create zones Zones creation menu will first delete all the not protected zones like standard zones then

re-create them and will continue with centered zones and multi-zones creation.

Create Joker

zones

Zones creation menu will create Joker zones.

This menu choice will not delete the existing Joker zones, but will create Joker zones

over existing ones.

If the menu Executable component is checked, only the executables compo-

nents are attached to zones, if not, all components of the tst file are attached.

The contextual menu allowing zones creations is accessible by clicking with the

right mouse button on the panel in the .tst file.

Zones creation

.TST file creation

4 - 30 Vision 2007 4.10 User Manual Rev 01

3. Select the jedecs by checking the left column.

4. Copy or delete jedecs if necessary by clicking on the je-

dec codification with the right button of the mouse.

Click on

Cancel

button to close the dialog box without taking

the modifications into account and without creating centered

zones but the standard zones creation is still processing.

Click on Save button to keep of all the modifications in

the zones.dsc file.

Click on Create button to keep of all the modifications in the zones.dsc file and launch

the creation of the centered and standard zones.

Click on Show all button to display all the jedecs in the zones.dsc file concerned by

the centered zones even if they are not in the tst file.

6. Following the creation, a information message will ap-

pear with the number of created zones for standard and

centered ones, multi-zones.

Click on OK button to display zones.

4.8.4.4 Automatic Joker zones creation

The menu Create Joker zones allows the creation and the management of zones.dsc

file concerning the jedecs associated to Joker zones.

1. Select Create Joker zones in the pulldown menu.

Case 1

: A message will appear

meaning that the zones.dsc has

not been created yet or that the

zones.dsc file exist but there

are no jedecs corresponding to

the .tst file pending.

The new jedec set could not be a jedec already

associated to a centered zone nor a jedec asso-

ciated to a joker zone, nor a jedec associated to

a multi-zone, the operator must correct the list

before creating the zones.

In the window displayed in order to select the jedecs,

only the jedecs that

belongs simultaneously to the zones.dsc file and the tst files appear

If the zones.dsc file is empty, no centered zones will be created, only standard,

scan, multi-zones will be created directly.

In order to fill the zones.dsc file, create manually joker zones before activating

the menu.

Zones creation

.TST file creation

Vision 2007 4.10 User Manual Rev 01 4 - 31

Case 2: a list of jedecs already defined for Joker zone will appear.

2. Select the jedecs by checking the left column and by checking the centered col-

umn if the jedec must be centered.

3. Copy or delete jedecs if necessary by clicking on the jedec codification with the right

button of the mouse.

4. Copy or modify light settings.

4.8.4.5 Automatic zones deletion and automatic attach, re-attach components

Some menus are defined in order to deletes zones or re-attach components to zones au-

tomatically.

The new jedec set, could not be a jedec already associated to a joker zone nor

a jedec associated to a centered zone, nor a jedec associated to a multi-zone,

the operator must correct the list before creating the zones otherwise he will not

be able to save or create the zones.

In the window displayed in order to select the jedecs,

only the jedecs that

belongs simultaneously to the zones.dsc file and the tst files appear

In the window displayed the light settings come initially from the default.ini file

when modified the light settings come from the zones.dsc file.

The buttons are similar to the centered zones dialog box, the difference is <<

button that allow the handling of the light settings.

Menu Description

Attach a component in zones F6 This menu (or F6 command) attach components not already attach

in zones. In case of moving some zones, the user can reattach the

components using the menu.

Re-attach all components F7 This menu (or F7 command) reattach all the components.

Assign multi-zones This menu attach very large components not already attach in multi-

zones.

Delete no protected zones Deletion of all no protected zones.

Delete all zones Deletion of all zones (protected or not).

Delete empty zones Deletion of empty zones with no attached components.

Executable component If this menu is checked, only the executables components are

attached to zones, if not, all components of the tst file are attached.

Zones creation