VI User Manual - 第147页
Match Maker Vision 2007 4.10 User Manua l Rev 01 6 - 13 Define Body button ( B ). Define the component bod y without the leads using a magenta square located in the camera window. The Camera window ( C ) is composed of a…
Match Maker
6 - 12 Vision 2007 4.10 User Manual Rev 01
6.4.3.2 Reference designator selection
This combo displays the list of the reference designators related to the current Part Number.
While a reference is selected, the camera moves to the selected component on the panel.
1. A Reference Designator is selected, the component appears to the screen.
2. Select a new Reference Designator, the camera moves towards the new component.
6.4.3.3 Component body size definition - Search for matching model
The component body size definition is composed of:
Body size fields (A), two cases:
Family without leads Family with leads
Board 1
Board 4
A
B
D
C
E
Match Maker graphical user interface
Match Maker
Vision 2007 4.10 User Manual Rev 01 6 - 13
Define Body button (B). Define the component body without the leads using a magenta
square located in the camera window.
The
Camera window
(
C
)
is composed of a
screen and a toolbar at the top which enables to
define the contour of the component precisely:
Select
Move
Zoom in
Zoom out
Fit image
Zoom 100%
Move camera
For offline station user (Save as)
Advanced parameters button (D) (optional). Set others parameters in order to optimize
the research.
Search for matching model button (E). Enable to find a list of model matching the un-
known component.
The component body size definition requires a logical sequence of actions described be-
low
and that depend of the situation: dimensions of the component known or unknown.
Case 1: the dimensions of the component are known
1. Check the position of the component in the
camera, it depends on the result of the execu-
tion of the fiducials:
If the
execution of fiducials fails,
the camera
is not centered on the component. The
component is far away from the center then
click on the button , the camera moves
with the keyboard arrows of your computer:
If the execution of fiducials is OK,
the cam-
era is centered on the component. In the
toolbar, all the buttons are activated.
Motion steps can be increased with the page up and page down
keys.
Match Maker graphical user interface
Match Maker
6 - 14 Vision 2007 4.10 User Manual Rev 01
2. Enter the values: Body size X, Body size Y
and Nb of leads if the field is present. The
Search for matching model button is activat-
ed.
3. Click on the Define Body button. A magenta square appears in the center of the
screen and surrounds correctly the component.
4. Click on the Define Body button. Match Maker loads the capture.
Match Maker graphical user interface