VI User Manual - 第25页

Getting started Vision 2007 4.10 User Manua l Rev 01 1 - 5 1.3 AOI system configuration To ensure AOI system fonctionning, hardware configuration must be set properly when starting Vision 2007 for the 1 st time. A user f…

Getting started

1 - 4 Vision2007 4.10 User Manual Rev 01

1.2 Vision 2007 encryption

1.2.1 Encrypting principle

Licenses are required to use software versions equal or upper than release J for Vision system,

Repair and Supervisor software. Licenses are generated in factory according to the dongle by

a ViTechnology software.

1.2.2 Available options

From all ViTechnology software you can see the list of all available options. In main menu bar,

go in Help menu and select Display available options…

1.2.3 Update options

To update option:

1. Select the Adding option menu from the ? section.

2. Get the locking code and send it to ViTechnology to update options.

3. ViTechnology return you a new code that you have to copy in Updating code.

4. Click on Update and news options are directly available.

Getting started

Vision 2007 4.10 User Manual Rev 01 1 - 5

1.3 AOI system configuration

To ensure AOI system fonctionning, hardware configuration must be set properly when starting Vision

2007 for the 1 st time. A user friendly interface, accessible when starting Vision 2007 in RESET mode,

gives access to AOI system configuration. All settings are saved in a .cfg file for AOI use and a .cf~ file

for safety back up.

1.3.1 Vision 2007 shortcut creation

The hardware configuration window is accessible using an Vision shortcut with an additional

parameter: RESET.

1.3.1.1 Create Shortcut

To create a shortcut, right click on

the desktop and select a new short-

cut, the opposite window appears.

Use the Browse button to select

the Vision software and after enter

RESET.

So the command line should finish

by ...\Vision2007.exe RESET.

Then click on Next.

1.3.1.2 Select a Title for the Program

This window asks you a name for

the shortcut. It is advise to add RE-

SET at the end of the name, so you

can distinguish the 2 Vision short-

cuts on the desktop.

Then, click on Finish and the

shortcut is created.

Double click on it to run vision sof-

ware and the hardware configura-

tion window.

Getting started

1 - 6 Vision2007 4.10 User Manual Rev 01

1.3.2 Hardware configuration window

1.3.2.1 Main tab

The first page shows you the existing configuration. You retreive all AOI system informa-

tion in this window.

1. Select the AOI system type in Machine Type (A).

2. Tick Stand Alone (B) if you work on stand alone AOI system.

3. Click on Save summary file button (C) to save the configuration in a .txt file.

AOI system configuration