VI User Manual - 第89页
.TST file creation Vision 2007 4.10 User Manua l Rev 01 4 - 15 4.5.1.4 Write feeder file t o disk window This last window ask to enter a feeder file result name. Click finish . The feeder file is created. 4.5.2 T est fil…
.TST file creation
4 - 14 Vision 2007 4.10 User Manual Rev 01
4.5.1.2 Select separators and preview data window
The below window appears.
This windows ask you to separate data in several columns.
You have to choose or enter which characters are columns separators. You can also re-
move lines if there is no feeder information in them. Just a mouse click and the line be-
come red.
When all feeder data are separated, click
Next >
.
4.5.1.3 Assign data column window
The Original Data list show the different column created when you choose the separator
characters in previous windows.
The central part ask which column contain required information (Topology, board, ma-
chine, level 1, level 2, level 3, level 4).
The Preview lists show the feeder file result.
When all important column are selected, click Next >.
Feeder information
.TST file creation
Vision 2007 4.10 User Manual Rev 01 4 - 15
4.5.1.4 Write feeder file to disk window
This last window ask to enter a feeder file result name.
Click finish.
The feeder file is created.
4.5.2 Test file importation
At anytime, you can import the feeder information on your program.
For this, in the Test file menu, go to Import sub menu and select Feeder Information.
The Open a feeder file window appears.
Select the text file containing your feeder information.
Double click on the selected .txt file or click Open to load it.
A feeder file is a text file (ASCII format) containing information on placement machine
for each Reference Designator.
Feeder information
.TST file creation
4 - 16 Vision 2007 4.10 User Manual Rev 01
It must contains 3 columns (separated by a space):
Reference Designator.
Board number.
Feeder information that can contains 5 levels separated by ._..
Usually the 1st level corresponds to the placement machine name. The others are the module,
stat and understat.
After selecting the feeder
file to import, the following
message is displayed:
YES: only the components
of this list to will be on test.
NO: all of the components
will be on test.
Delete the previous feeder information, before loading the present one.
4.5.3 Information result
The feeder information
appears on the compo-
nent edition window.
Feeder information