00198705-01_AI_Portalmodularität_SX12_V3_DE_EN - 第121页
4 Dismantling a Gantry 4.2 Performing Calibration Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 121 Fig.65: Select subsystem ► Select the subsystem for the eSW d…
4 Dismantling a Gantry
4.2 Performing Calibration
120 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
4.2.1 eSW Download (SW 70x)
Fig.62: Select operator level
► Select the button.
► Select the button.
► Switch over to the operator level Ma-
chine service.
ð The button will be shown.
Fig.63: Service menu
► Click the button to enter the Ser-
vice menu.
► Click on the Embedded software but-
ton.
Fig.64: Embedded software menu
Select the required function:
► Click on Update machine… to check
the entire machine and to perform an
eSW download for multiple subsystems
(see next picture).
► Click on Update subsystem… to se-
lect one subsystem, check and to per-
form an eSW download.
► Click on the button Version informa-
tion…, to view all versions of the sub-
systems, BIOS, application 1/2/3/5.
4 Dismantling a Gantry
4.2 Performing Calibration
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 121
Fig.65: Select subsystem
► Select the subsystem for the eSW
download.
► Click on the Continue button.
Fig.66: Update machine menu
●
On the left, you can see the selection
buttons:
BIOS
Application 1
Application 2
Application 3
....
●
The large main area in the center
shows the status of the individual sub-
systems.
The lower edge of the main area shows
how many subsystems must still be
downloaded.
●
The button Start update starts the
download
4 Dismantling a Gantry
4.3 Checklist
122 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
4.3 Checklist
► Put this check list in the machine logbook.
Gantry dismantled (downgrade)
Step Action Who?
1 Gantry removed? Customer in line with assembly
guide
2 Is the gantry secured in the gantry carrier? Customer in line with assembly
guide
3 Head secured in center of gantry? Customer in line with assembly
guide
4 Are the correct end position buffers fitted? Customer in line with assembly
guide
5 Has the trailing cable been packed correctly and
fixed in the machine?
Customer in line with assembly
guide
6 Has the stationary camera (optional) been dis-
mantled, if necessary?
Customer in line with assembly
guide
7 Have the camera connections been unplugged from
the box PC?
Customer in line with assembly
guide
8 Has the nozzle changer been dismantled, if neces-
sary
Customer in line with assembly
guide
9 Is the reject bin fitted? Customer in line with assembly
guide
10 Have all tools been removed from the machine? Customer in line with assembly
guide
11 Are the doors screwed? Customer in line with assembly
guide
12 Is the machine switched on and ready for operation? Customer in line with assembly
guide
13 Have all calibration steps been performed? Customer in line with assembly
guide
Date Signature