00198705-01_AI_Portalmodularität_SX12_V3_DE_EN - 第66页
5 Anhang 5.1 Übersicht MGCU (Rxxxx) 66 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
5 Anhang
5.1 Übersicht MGCU (Rxxxx)
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 65
5 Anhang
5.1 Übersicht MGCU (Rxxxx)
Abb.67: Übersicht MGCU
5 Anhang
5.1 Übersicht MGCU (Rxxxx)
66 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
67Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
Contents
Contents
1 Introduction.. 69
1.1 Safety instructions.. 69
1.1.1 Conventions for the use of safety instructions and symbols.. 69
1.1.2 Safety instructions for working with strong magnetic fields.. 70
1.1.3 Safety instructions for the power supply.. 70
1.1.4 Safety instructions for the compressed air supply.. 72
1.1.5 Safety instructions for work on the cutting device.. 72
1.1.6 Safety instructions for the gantry.. 72
1.2 Preparatory work..... 73
1.3 Other instructions.. 75
1.3.1 Environmentally-friendly disposal of materials and components.. 75
1.3.2 Use of original accessories and spare parts.. 75
1.3.3 ESD guidelines.. 75
1.3.3.1 What does ESD mean?.. 75
1.3.3.2 Important measures to protect against static charging.. 75
1.3.3.3 Handling ESD modules.. 75
1.3.3.4 Measurements and modifications to ESD modules.. 76
1.3.3.5 Dispatching ESD modules.. 76
1.3.4 Release History.. 76
1.4 Abbreviations.. 76
2 Brief Description.. 77
2.1 Overview.. 77
2.1.1 Machine Variants.. 77
2.1.2 Head Configuration.. 77
2.1.3 Overview of "Fast Gantry Modularity".. 80
2.1.4 Configurations.. 82
2.1.4.1 Table Positions.. 82
2.1.4.2 Stationary Cameras.. 83
2.1.5 Additional Work.. 85
2.1.5.1 Buffer Stopper.. 85
2.1.5.2 Empty Tape Duct Intermediate Plate.. 86
2.2 Scope of Delivery.. 87
2.2.1 SIPLACE C&P20P2 head.. 88
2.2.2 SIPLACE Twin P&P.. 88
2.2.3 SIPLACE CPP head.. 88
2.2.4 Gantry.. 89
2.2.5 Gantry carrier plate for SIPLACE SX1/SX2 [03012160-xx].. 89
2.3 Tools and Equipment Required.. 89
3 Fitting the Gantry.. 91
3.1 Requirements.. 91
3.1.1 SIPLACE SX "Prepared".. 91
3.2 Preparations at the Machine.. 91
3.2.1 Removing the End Position Buffer.. 92
3.2.2 Preparing the Trailing Cable.. 92
3.3 Gantry Preparations.. 94
3.3.1 The Gantry Lift.. 94
3.3.2 Unpacking the Gantry.. 96