PSV5000_OwnersManual - 第101页
Self - Ser vice Spares Kit T u r ning off the Syst ems PSV5000 O wner ’s M anual - 97 - Self - Servi ce Spares Kit The Self - Service Spa res Kit, Da ta I/O p art nu mber 9 52 - 0508 - 001 or higher, can be purchase …
Maintenance ■ Additional Features
- 96 - Data I/O ■ 096-0465-001C
Note: Specific items are noted at each individual procedure.
GENERALLY REQUIRED ITEMS
• Lens cleaning paper (Data I/O PN 570041)
• Water dampened cloth for cleaning
• Isopropyl alcohol
• Antistatic cleaner
• Dry, compressed air
• Safety goggles
• Disposable protective gloves
• Particle (dust) mask
• SAE and metric hex socket wrenches and hex keys (Allen
Wrenches). Data I/O hex key set PNs: Metric 565-0006-001, and
Standard 565-0007-001
• Screw driver sets, flat and Phillips
• Metric open end wrenches for the probe tips
• Shop vacuum cleaner
• Self-Serve Spares Kit (page 97)
Turning off the Systems
When the PSV5000 System will not be used for several days, or before
performing a service procedure, turn OFF the system.
See Shutting Down the PSV5000 System on page 38.
Self-Service Spares Kit Turning off the Systems
PSV5000 Owner’s Manual - 97 -
Self-Service Spares Kit
The Self-Service Spares Kit, Data I/O part number 952-0508-001 or
higher, can be purchased at any time.
910-2200-00d or higher: Diagnostics
Adapter Board (DAB) only for FC
programmer calibration
(Sales PN: FC-DIAGNOSTICS BOARD)
750-2474-001 or higher: an entire
probe assembly
480-0070-001 or higher: 16-port
V-LAN Ethernet hub
750-2464-001 or higher: programmer
power supply
2940220001 or higher: Pneumatic
Silencer
Maintenance ■ Workspace, Head and Gantry
- 98 - Data I/O ■ 096-0465-001C
Workspace, Head and Gantry
The workspace includes the Socket Adapters and items on the working
surface, but not the programmers. They are covered in a separate
heading.
Socket Adapters and Actuation
Under this heading you will learn about visually inspecting, cleaning and
adjusting sockets, actuation, and air pressure for the workspace items.
INSPECTING THE SOCKET ADAPTERS
The condition of the Socket Adapters has great throughput
consequences.
SOCKET LIFE
The Run window displays the Socket
Adapter lifetime actuation count in yellow
until it is exceeded at which time it changes
to red.
SOCKET CLEANING
WARNING: Vision hazard! Pressurized air or debris blown into
the eyes or skin could cause bodily damage. Always use care and
wear protective eye goggles when cleaning with pressurized air.
1. Use clean, dry compressed air (at 6.2 Bars (90 PSI or less) to remove
dirt from the sockets. Open and close the sockets while blowing them
out.
2. Check the sockets for wear and replace if necessary.
Note: The socket replacement cycle depends upon the type of socket used
and the socket manufacturer.
TURNING OFF INPUT AIR
Prior to turning off the input air, ensure that no job is running.
CAUTION: Possible damage to programmers and devices! DO NOT
TURN AIR OR POWER OFF to the PSV5000 Machine while a job is